Micro Seiki M505II tonearm height adjustment - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th November 2008, 02:36 AM   #1
kffern is offline kffern  Australia
diyAudio Member
 
Join Date: May 2006
Location: Perth
Send a message via Skype™ to kffern
Default Micro Seiki M505II tonearm height adjustment

Hi,
I need some help from any Micro Seiki tonearm owners out there. I found a M505II that hasn't been used for many years. The tonearm pillar is loose in the collar and looking at the manual I think I should twist like a screw to get it to loosen/tighten on the pillar. The manual could also mean turn/push the lever anticlockwise to loosen or clockwise to tighten. I can't see how that would tighten on the pillar and it doesnt seem to do anything, so before I break anything could someone please advise. Any other tips on using this arm would be welcome.
I have tried WD40 on the inside of the lock lever and twisting but nothing gives.

Thanks,
Kffern
BTW the tonearm was on a lightly used BL-51 which I have too.
  Reply With Quote
Old 17th November 2008, 06:27 PM   #2
diyAudio Member
 
Panicos K's Avatar
 
Join Date: Oct 2006
Some tonearms have more than one screw to release the pillar from the collar.Check yours.Maybe only the one screw is loose.
  Reply With Quote
Old 18th November 2008, 10:17 PM   #3
diyAudio Member
 
aparatusonitus's Avatar
 
Join Date: Jan 2004
Location: Split, Croatia
Hi kffern,

I have a Micro Seiki MA-505 (DD-40) 2 page service manual... if you are interested mail me.
__________________
Non mai abbastanza...
  Reply With Quote
Old 19th November 2008, 01:16 AM   #4
kffern is offline kffern  Australia
diyAudio Member
 
Join Date: May 2006
Location: Perth
Send a message via Skype™ to kffern
Thanks Guys, but I solved the problem later that day. Apologies for not posting earlier but I didnt think I'd get a response after all this time.
All it needed was a bit of WD40 and it started turning. Before that the fixing nut loosened when I tried to move it back, yet it was not tight on the tonarm pillar. Works great now.
Regards,
kffern
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Micro-Seiki MB-10 TT - Too Slow..! Miti Analogue Source 23 13th April 2008 01:37 AM
Micro Seiki Tonearm. MiiB Analogue Source 2 28th May 2007 03:14 PM
Micro-seiki DQX-500 gotster Analogue Source 0 11th January 2005 07:44 PM
Micro Seiki MC ktigerb Analogue Source 0 27th May 2003 09:16 AM


New To Site? Need Help?

All times are GMT. The time now is 07:52 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2