Systemdek llX

Jazzcat · 11th October 2008, 04:52 PM

Greetings Analog brothers. Bought a Systemdek llX. Nice table but the OEM arm has to go. Question: Is there a good arm that fits the S'dek armboard ? (It's the older, smaller one. Not the later, longer one) Ittok, Rega ? Any thoughts on synergies ? Cheers, Rob

Zero Cool · 11th October 2008, 05:08 PM

I have heard that the Rega 250 is the arm of choice for these. I have a systemdeck myself that one of these days i will get going

Zc

Panicos K · 11th October 2008, 09:38 PM

Jazzcat,a Linn LVX or Basik plus will fit in the existing hole if it is the one with the three sattelites around it.And they are a good sonic match.Regas sound good too on the IIX but you will need a new armboard,the Regas are longer than Linns.

Jazzcat · 12th October 2008, 05:11 AM

Thanks Z Cool and Panicos. I think the S'dek armboard is MDF, and therefore a decent material. I'd like to keep the armboard in tact if I can. I am pleased to know Linn arms may be a "drop in". I will measure.

Check this out - the other day my platter also spun backwards ! A dry Cap in the p. supply is suspected. I am thinking of just getting a new Airpax motor and a Valhalla supply to match it. I'll post my progress, whether they fit or not. Comments about motors and power supplies also welcome. Cheers, Rob

11th October 2008, 04:52 PM	#1
Jazzcat diyAudio Member Join Date: Jun 2007	Systemdek llX Greetings Analog brothers. Bought a Systemdek llX. Nice table but the OEM arm has to go. Question: Is there a good arm that fits the S'dek armboard ? (It's the older, smaller one. Not the later, longer one) Ittok, Rega ? Any thoughts on synergies ? Cheers, Rob

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motor for Systemdek llX	watchvet	Analogue Source	17	24th November 2008 09:13 PM
Systemdek Tune Up	gary f	Analogue Source	21	23rd October 2006 03:47 PM
Systemdek powersupply help	Humanjava	Analogue Source	4	15th April 2006 07:56 AM
systemdek 2x circuit	dhole	Analogue Source	0	29th June 2005 12:07 PM
Systemdek IIX tweaks	Sid-W	Analogue Source	10	12th March 2004 01:58 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th October 2008, 05:08 PM	#2
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	I have heard that the Rega 250 is the arm of choice for these. I have a systemdeck myself that one of these days i will get going Zc

11th October 2008, 09:38 PM	#3
Panicos K diyAudio Member Join Date: Oct 2006	Jazzcat,a Linn LVX or Basik plus will fit in the existing hole if it is the one with the three sattelites around it.And they are a good sonic match.Regas sound good too on the IIX but you will need a new armboard,the Regas are longer than Linns.

12th October 2008, 05:11 AM	#4
Jazzcat diyAudio Member Join Date: Jun 2007	Thanks Z Cool and Panicos. I think the S'dek armboard is MDF, and therefore a decent material. I'd like to keep the armboard in tact if I can. I am pleased to know Linn arms may be a "drop in". I will measure. Check this out - the other day my platter also spun backwards ! A dry Cap in the p. supply is suspected. I am thinking of just getting a new Airpax motor and a Valhalla supply to match it. I'll post my progress, whether they fit or not. Comments about motors and power supplies also welcome. Cheers, Rob

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)