|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
7th October 2008, 02:07 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2007
|
DC motor built in PLL
Hello folks;
While i was looking motor control circuit for a DIY turntable; I came across a new motor. ( 3 Phase 12 pole brushless Dc motor ) Phase-locked-loop speed control is a built-in . What sort of a control unit would you suggest to use on this? Any idea Thanks http://www.nidec.com/admcmc/27h.pdf (page 3/3 ) |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help required for using a FDD motor as a turntable motor. | binspaul | Analogue Source | 5 | 13th May 2009 03:59 AM |
| Lambda motor vs. XBL^2 motor vs. any other motor | Thinkcat | Subwoofers | 16 | 23rd December 2008 06:23 AM |
| DIY TT: motor, motor PS, platter speed measurements | dice45 | Analogue Source | 52 | 9th May 2006 01:07 PM |
| DIY TT motor | FrancoB | Swap Meet | 3 | 18th May 2005 08:43 AM |
| dc motor | dionysio | Analogue Source | 1 | 3rd May 2004 01:09 PM |
| New To Site? | Need Help? |
