Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

My Revox B790 has blown its fuse
My Revox B790 has blown its fuse
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 16th September 2008, 07:41 PM   #1
csrote is offline csrote  United States
diyAudio Member
Join Date: Jun 2008
Default My Revox B790 has blown its fuse

Fuse is 400ma @ 120v or 200ma @ 240v. It is not available at Radio Shack (closest is 500ma@240v) so I will need to do an actual parts order from a major parts house (was going to do any way for other projects.)

I have the service manual.

A blown fuse implies power supply problems. Any tips on trouble shooting the PS when I finally get the proper fuse?

Thnx for all help,
  Reply With Quote
Old 18th September 2008, 01:02 PM   #2
rayfutrell is offline rayfutrell  United States
diyAudio Member
Join Date: Sep 2004
Location: virginia
In the US you want the 400ma 120V fuse. Home Depot has some of those European fuses, so you might find it there in the electrial parts. I have seen fuses open for no apparent reason except old age.

The 500ma 250V fuse will work, but the current rating is 25% too high.

  Reply With Quote
Old 18th September 2008, 02:17 PM   #3
SaSi is offline SaSi  Greece
diyAudio Member
Join Date: May 2008
IIRC, the fuse in the Revox TTs is a slow blow one. I've replaced the original one with a slightly overrated quick blow one, but overrated by 100mA only.

One of the most simple reasons why the fuse might blow is that the decoupling capacitor that is soldered on the mini PCB where all the AC power cables concentrate is short. Inspect it closely and you might find it has turn black or even broken at one side.

You could also remove that PCB from the base and check the resistance across the capacitor's leads. If it is 0, then it is probably dead.
  Reply With Quote
Old 18th September 2008, 04:49 PM   #4
Steerpike is offline Steerpike
diyAudio Member
Steerpike's Avatar
Join Date: Jan 2006
Location: Johannesburg, South Africa
Since it's a ReVox, my bet is one of the three large electrolytic capacitors on the power supply PCB has gone short circuit.
Those Frako ones are almost guaranteed to go short after 30 years, so you might want to replace them anyway while you're ordering parts.
  Reply With Quote


My Revox B790 has blown its fuseHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
amp blown fuse = output offset ? AndrewT Solid State 42 13th November 2014 06:45 AM
Repairing Class A/AB amp with Blown Fuse excetara2 Analog Line Level 5 8th March 2009 09:34 AM
Please help: no sound and blown fuse spendorspain Tubes / Valves 6 11th December 2008 01:48 PM
ETI480 blown fuse... bezel6 Solid State 1 29th November 2005 11:25 PM
Blown fuse!!! StalfoS Chip Amps 13 4th June 2005 12:10 PM

New To Site? Need Help?

All times are GMT. The time now is 01:03 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio