Simplistic NJFET RIAA - Page 569 - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th December 2010, 04:53 PM   #5681
vgeorge is offline vgeorge  Greece
diyAudio Member
 
vgeorge's Avatar
 
Join Date: Mar 2004
Location: poros island
Merlin, yes they are the same I am using, only 2m. Regarding sound, only by comparison you can tell. I compared it to some old Audioquest Emerald, Roksan and some DIY I have and they were better.
  Reply With Quote
Old 29th December 2010, 06:14 PM   #5682
RCruz is offline RCruz  Switzerland
diyAudio Member
 
RCruz's Avatar
 
Join Date: Sep 2006
Location: Wallis
Blog Entries: 1
Quote:
Originally Posted by nicoch46 View Post
found this for free , but need a beta tester......
Hi nicoch46... where did you find this literature ?

Why does the author state the need to turn the preamp on before doing the demag trick if it is done with the rca´s disconected from the preamp ?

Did you try this ?

I know it will not cause any damage but the text itself is quite suspicious

What about the type of record... should we do it with loud metal or soft chamber music ?

Just for pleasure

Ricardo
  Reply With Quote
Old 29th December 2010, 10:37 PM   #5683
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by vgeorge View Post
Merlin, yes they are the same I am using, only 2m. Regarding sound, only by comparison you can tell. I compared it to some old Audioquest Emerald, Roksan and some DIY I have and they were better.
I'm using Kimber KS Select 1030 1.5 m silver & teflon also.

Click the image to open in full size.

My cables don't have same connectors, have the WBT without solder but old model.

Last edited by merlin el mago; 29th December 2010 at 10:39 PM.
  Reply With Quote
Old 29th December 2010, 10:40 PM   #5684
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by RCruz View Post
Hi nicoch46... where did you find this literature ?

What about the type of record... should we do it with loud metal or soft chamber music ?

Just for pleasure

Ricardo
Ricardo are you kidding, right
  Reply With Quote
Old 29th December 2010, 11:58 PM   #5685
maxpou is offline maxpou  Canada
diyAudio Member
 
maxpou's Avatar
 
Join Date: Apr 2006
Location: Québec
Hi Salas,
why in my phono schematic the cap C1 is between Vcc to the gate and the other one is parallel to the string led? Thank you! Maxpou
  Reply With Quote
Old 30th December 2010, 12:18 AM   #5686
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
I was tying to Vcc for better PSRR at the time, but I could not see any measurable difference after I tested again tying to ground, so I kept it orthodox in later schematics. No difference.
  Reply With Quote
Old 30th December 2010, 09:09 AM   #5687
diyAudio Member
 
Join Date: Aug 2009
Quote:
Originally Posted by massimo View Post
I read Andrew T's suggestion in the HV thread.
Thus we need another "beta tester"..... Maybe Joao would like to give a try
Massimo,

please describe exactly what Andrew's suggestion is.. I haven't all in mind.. and time to search the forum.

Maybe I have already done this and can share my experience.
  Reply With Quote
Old 30th December 2010, 09:30 AM   #5688
vgeorge is offline vgeorge  Greece
diyAudio Member
 
vgeorge's Avatar
 
Join Date: Mar 2004
Location: poros island
Quote:
Originally Posted by merlin el mago View Post
I'm using Kimber KS Select 1030 1.5 m silver & teflon also.

Click the image to open in full size.

My cables don't have same connectors, have the WBT without solder but old model.
How much do they cost? I think for this kind of money there are other things to do to your system in order to get better sound. One of the best systems I have heard, used ordrianary cables!
  Reply With Quote
Old 30th December 2010, 09:36 AM   #5689
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by vgeorge View Post
How much do they cost? I think for this kind of money there are other things to do to your system in order to get better sound. One of the best systems I have heard, used ordrianary cables!
About cables all depends gear, systems are more critical & systems that aren't critical, if I have to buy today surely I don't buy.
  Reply With Quote
Old 30th December 2010, 10:48 AM   #5690
massimo is offline massimo  Italy
diyAudio Member
 
Join Date: Dec 2002
Location: Milan, Italy
Quote:
Originally Posted by Joao@AltheaMusica View Post
Massimo,

please describe exactly what Andrew's suggestion is.. I haven't all in mind.. and time to search the forum.

Maybe I have already done this and can share my experience.
see attachment
Attached Files
File Type: pdf shunt reg x3.pdf (41.6 KB, 75 views)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 09:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2