Simplistic NJFET RIAA

[cdebien]

See the RJM phonoclone thread.

Many Thanks,

Cyr-Marc

 

[Rush]

Thanks, George - can you tell me how I can contact "Spencer"?


Regards,

Andrew

He has a store: Store | FET Audio

Rush

 

[andyr]

He has a store: Store | FET Audio

Rush

Great, thanks, Rush.

Andy

 

[The Space Egg Corp]

It is sounding really serious right now....
Pics latter

Top Experimenting Ricardo !!!

( we like SERIOUS ! )

Cheers.


Si.

PS... Thanks for the EQuations !!!

 

[Botte]

Salas,

I did my conversion to the folded and the results are outstanding! Lower noise floor and better sence of timing. Very recommended

My MC is .47 output.

Thanks,

 

[Salas]

You used to have the MM with SUT? Now you converted to full MC folded? K369 or 170s?

 

[andyr]

I did my conversion to the folded and the results are outstanding! Lower noise floor and better sence of timing. Very recommended

Where in this thread can I find the schematic for the "folded RIAA"?

Thanks,

Andy

 

[Salas]

Go to post one and click bottom link.

 

[andyr]

Go to post one and click bottom link.

Aah, thanks Salas.


Regards,

Andy

 

[Salas]

Cheers, nothing much for Andy from a land down under where women glow and men plunder.

 

[andyr]

Cheers, nothing much for Andy from a land down under where women glow and men plunder.

I always thought the words were "from a land down under where women glow and men chunder"!!

You'll have to Google "chunder". (Also known as "the technicolour yawn". )

Regards,

Andy

 

[Salas]

I know chunder, what is zombie btw? Some word for strong pot? They start in a fried out combie with hilarious hair and weary in the classic video.

 

[massimo]

While we are in OT mode, how is Athens covered by snow?

 

[Salas]

In the centre it lasted little, but was nice.

 

[Botte]

You used to have the MM with SUT? Now you converted to full MC folded? K369 or 170s?

Yes, I dropped the transformers earlier and increased gain. I used two 170's with 4.9ohm on each source. I did have to adjust R3 a little to hit the range for VR1.

 

[andyr]

I know chunder, what is zombie btw? Some word for strong pot? They start in a fried out combie with hilarious hair and weary in the classic video.

Aha - it is "Kombie", not zombie, Salas. A "Kombie" was - still is - one of those VW vans which you could convert into a car to go camping in. And "fried out" means stuffed - ie. mechanically on its last legs.

Regards,

Andy

 

[Salas]

Yes, I dropped the transformers earlier and increased gain. I used two 170's with 4.9ohm on each source. I did have to adjust R3 a little to hit the range for VR1.

Nice. Completely new board, or you just did a rework?

 

[Botte]

Just a rework with the same EQ parts, I did add the extra 170 to the output.

Many thanks,

 

[buzzforb]

It seems this weekend may bare fruit

 

[zeeuw]

hello

just build the phonostage, based on document V1102
but, i think, someting is wrong
I do not have a voltage drop over first mosfet (IRFP9140)
Vgs = 4 volt
what's wrong?

does someone know?

sander