Simplistic NJFET RIAA

The shorter the wires the better, even with Kelvin connection.
If you can, put in the PS box rectifiers and first cap and regulators close to to RIAA circuit.

Since the rectifiers are on the board with the regulator I am leaving them in the same chassis. When I put the complete unit into the cabinet with the other equipment I will make the connecting wires from the power supply box to the riaa box as short as possible. Should be only a couple inches.
Evan
 
Great I have plenty of cat 5 wire. I am thinking 2 strands per connection.

I fuse both in case there is a mix up in the houses wiring. Making up the connection to one fuse or two is about the same amount of work and I saw no reason not to.

I will Put heat shrink over the exposed connections of the fuses and or a small plastic cover over the whole area.

Thanks, Evan