||15th July 2008 03:43 AM
Belt driven Motor placement and belt properties
I was wondering, where is the best location for the motor (distance, orientation angle, etc.) in a table such as a Nottingham Space Deck, Teres, etc. where the motor is disconnected from the platter? I'm assuming so both lengths of the belt are equidistant and other than that, I have no idea.
Also, how much tension should be on the belt? I suppose the answer is as little as needed....
||15th July 2008 11:01 PM
Both the issues you mention are quite open to debate.
||16th July 2008 05:21 PM
Re: Belt driven Motor placement and belt properties
Originally posted by luvdunhill
IAlso, how much tension should be on the belt? I suppose the answer is as little as needed....
The amount of tension should not exceed the motor's axial load specification.
|All times are GMT. The time now is 06:09 PM.
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio
Content Relevant URLs by vBSEO