Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Dual CS510 Running WAY too fast - sometimes
Dual CS510 Running WAY too fast - sometimes
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th June 2008, 06:28 PM   #1
jaguarxke is offline jaguarxke  United States
diyAudio Member
Join Date: Jun 2008
Default Dual CS510 Running WAY too fast - sometimes

Hi Everyone,

I have an old dual CS510 turntable that normally runs well, but every now and then runs WAY too fast. I never play 45's so I have noticed this on 33 1/3 RPM. When this happens, I can turn off the turntable and there is a very good chance it will run properly for the next several times I use it.

Then, out of the blue, it will run fast again. When it runs fast, I mean very fast - probably in the ballpark of twice as fast as it is supposed to. I'm reasonably certain it is running faster than 45 RPM (while being set at 33 1/3.)

Any ideas what would cause this condition?

Thanks in advance for any suggestions.

  Reply With Quote


Dual CS510 Running WAY too fast - sometimesHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Running stereo through a single tube with dual triodes? RockysDad Tubes / Valves 2 21st January 2009 12:47 AM
What advantages running ported midbass if you are running a sub? mitchyz250f Multi-Way 3 20th May 2008 02:34 PM
dual primary//dual secondary toroid larryg Chip Amps 22 6th September 2006 09:24 PM
i need fast help shereen Digital Source 0 21st June 2005 09:14 PM
How fast are 'Fast Fuse' and how to identify? bigpanda Solid State 7 22nd March 2005 09:00 PM

New To Site? Need Help?

All times are GMT. The time now is 01:50 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio