|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Oct 2004
|
I found this http://www.circuitcity.com/ssm/Audio...oductDetail.do
(in-store special i $1.64). The tuner section is decent, labeled and easy to add rca plugs. Recased, I think it will make a nice enough tuner. For those,who has the Accurian amps this should be right up your alley will post pictures later |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Oct 2004
|
I started taking the dock apart. this is what I find so far
the dc from the radio section is below .2mv both channels The output impedance is about 7.5k |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Oct 2004
|
cutting the top led(I,only use the bottom),will cut some of the brightness but you will still need to add resistors.
|
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Oct 2004
|
Cutting four wires and adding RCA plugs is all you need to connect the tuner.
BTW the bass boost button causes some weird mono so you won’t be able to use it and keep the output in stereo Next I will find and change the coupling cap. |
|
|
|
|
#5 |
|
diyAudio Member
Join Date: Oct 2004
|
picture of inside
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SMD Rework Stations Reccomendations? | Zero Cool | Equipment & Tools | 2 | 23rd March 2008 03:35 PM |
| Pace soldering/rework station | speakerguy79 | Parts | 4 | 31st May 2007 05:54 PM |
| Rework -- cleaning up through-holes | jackinnj | Everything Else | 1 | 20th March 2007 05:14 PM |
| Using heat Lamps for DIY IR rework | fr0st | Parts | 0 | 23rd July 2004 01:43 PM |
| PACE MBT Rework Station on Ebay | damonpip | Swap Meet | 1 | 14th December 2003 10:48 PM |
| New To Site? | Need Help? |
| Page generated in 0.09407 seconds (72.56% PHP - 27.44% MySQL) with 11 queries |