Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

repairing an old  Dual 505 arm/headshell
repairing an old  Dual 505 arm/headshell
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th May 2008, 09:46 AM   #1
jives11 is offline jives11  United Kingdom
diyAudio Member
jives11's Avatar
Join Date: Mar 2004
Location: Hampshire
Default repairing an old Dual 505 arm/headshell


having not used a turntable for 20+ years I picked one up from freecycle - it's a Dual CS505. I'd like to get it working , in part to show my kids how miraculous the LP reproduction is.

This particular model has an integral headshell and a rather beaten looking ortofon cartridge but which also has a Dual ref 149S. The cartridge seems to have a case designed to connect with the headshell in that it has 4 tabs which I guess are supposed to connect to 4 tabs in the headshell. It's not the kind I recall (i.e SME) where two bolts hold the cartridge on with 4 wires emerging from the arm tube. This one uses a tiny long grub screw to hold the cartridge in place.

The whole affair seems in a poor state and looks like superglue has been applied at some point, which is confirmed by no sound coming out of either channel via the Phono/Disc input on my Quad 44. I suspect that the cartridge contacts are not working and the whole headshell assembly is beyond help

Q: Is it possible to remove the whole headshell / cartridge section and replace it with a more conventional headshell ? The dust case has a nasty crack but other than that it's in reasonable condition. is it best put on ebay for spares/repair ?
  Reply With Quote
Old 8th February 2009, 04:27 PM   #2
richardmoon is offline richardmoon  United Kingdom
diyAudio Member
Join Date: Jan 2009
Hi,the origional cart on the 505 is removed by removing the tiny grubscrew and pushing the finger lift back approx 1/4".The cartridge will then fall off.To use a different cart you need to buy a dual mount kit ,not sure if you can still buy them ,mine was 14.50 in 1986!.I remember having regular problems with the cartridge contacts.On top of the cartridge their are four small metal points which connect to four small springy contacts on the underside of the headshell.Cleaning the contacts using on both usually helped.
  Reply With Quote


repairing an old  Dual 505 arm/headshellHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WT: Dual 505-2 turntable headshell gaborbela Swap Meet 2 1st June 2008 07:19 AM
Headshell bits gkimeng Parts 0 14th December 2007 09:08 PM
New Headshell -- too light GhettoSQ Analogue Source 3 28th July 2006 10:57 PM
WTB: Grace 727/747 headshell slydwz Swap Meet 0 28th June 2005 02:41 PM
attaching a headshell spooky1234 Analogue Source 4 23rd March 2005 04:07 PM

New To Site? Need Help?

All times are GMT. The time now is 05:36 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio