My DIY Teres Turntable My DIY Teres Turntable - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

My DIY Teres Turntable
My DIY Teres Turntable
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th October 2007, 02:48 PM   #1
Algar_emi is offline Algar_emi  Canada
diyAudio Member
 
Algar_emi's Avatar
 
Join Date: Oct 2002
Location: Canada, Qc
My DIY Teres Turntable
Default My DIY Teres Turntable

Hi. I received the Teres acrylic platter and bearing assy today in perfect condition. I bought them from an other user, randytsuch. It was very well packed. Thanks Randy.

My teardrop wood base is in the making at a furniture maker shop. He will charge me only about 50-60$ to make the complete base and armboard, all made of dried maple, laminated and ready for finishing. It doesn't worth to do it myself ;-)

I'm planning to put bird-eye maple veneer on it and nice lacquer finish.

I have 3 diamond cones feet on order to put under the turntable.
I already have my own version of Mark Kelly Maxon battery supply motor controller already built and ready to go.
One of my contact in Europe will build me a nice pulley for the new mylar tape drive as used in the new Teres. He can also get me the Maxon Motor.

I'll start the motor enclosure in the next week. It may well be a BIX turntable motor casing with a custom top plate to fit the Maxon motor.

Finally, I'm planing to build a DIY Shroeder tonearm to go with it. A lot of fun in the making.
  Reply With Quote
Old 5th October 2007, 02:57 PM   #2
Algar_emi is offline Algar_emi  Canada
diyAudio Member
 
Algar_emi's Avatar
 
Join Date: Oct 2002
Location: Canada, Qc
My DIY Teres Turntable
Here the platter. I'll buy the Teres record clamp.
Attached Images
File Type: jpg the platter.jpg (62.4 KB, 5216 views)
  Reply With Quote
Old 5th October 2007, 03:03 PM   #3
Algar_emi is offline Algar_emi  Canada
diyAudio Member
 
Algar_emi's Avatar
 
Join Date: Oct 2002
Location: Canada, Qc
My DIY Teres Turntable
The main bearing. The oil was missing, but an other user that help me a lot so far mentioned that the oil that Teres use is the "Marvel Air Tool" oil. It is available from amazon.
Attached Images
File Type: jpg the bearing.jpg (30.3 KB, 4762 views)
  Reply With Quote
Old 5th October 2007, 03:05 PM   #4
Algar_emi is offline Algar_emi  Canada
diyAudio Member
 
Algar_emi's Avatar
 
Join Date: Oct 2002
Location: Canada, Qc
My DIY Teres Turntable
And the accessories. I'm trying to get the original Teres 1/2 Mylar tape pulley but didn't get any reply from Teres Chris Brady so far. I would like to buy the original pulley if possible. More on it latter.
Attached Images
File Type: jpg the parts.jpg (55.3 KB, 4603 views)
  Reply With Quote
Old 5th October 2007, 03:11 PM   #5
randytsuch is offline randytsuch
diyAudio Member
 
Join Date: Jan 2003
Location: LA
Default Re: My DIY Teres Turntable

Quote:
Originally posted by Algar_emi
Hi. I received the Teres acrylic platter and bearing assy today in perfect condition. I bought them from an other user, randytsuch. It was very well packed. Thanks Randy.

My teardrop wood base is in the making at a furniture maker shop. He will charge me only about 50-60$ to make the complete base and armboard, all made of dried maple, laminated and ready for finishing. It doesn't worth to do it myself ;-)

I'm planning to put bird-eye maple veneer on it and nice lacquer finish.

I have 3 diamond cones feet on order to put under the turntable.
I already have my own version of Mark Kelly Maxon battery supply motor controller already built and ready to go.
One of my contact in Europe will build me a nice pulley for the new mylar tape drive as used in the new Teres. He can also get me the Maxon Motor.

I'll start the motor enclosure in the next week. It may well be a BIX turntable motor casing with a custom top plate to fit the Maxon motor.

Finally, I'm planing to build a DIY Shroeder tonearm to go with it. A lot of fun in the making.
Hi
Good, glad everything arrived safely.

Good luck with your project, sounds like you will have a really nice TT when you're done, I am sure it will rival some high end tables.

Glad you're making better use of the stuff than I did.

Randy
__________________
My system is here
http://randytsuch-audio.blogspot.com/2005/10/my-system.html
  Reply With Quote
Old 5th October 2007, 03:33 PM   #6
woodturner-fran is offline woodturner-fran  Ireland
diyAudio Member
 
Join Date: Jan 2006
Location: Ireland
FYI:

I used synthetic oil in mine: 5W30 IIRC.

The Teres clamp is excellent - I have the delrin one and its very good in operation - you know the way its used, right? with the spacer under it etc?

Chris can be a little slow to respond to emails, try ringing him.

Teres also have a brass thrust plate that the ball at the bottom of the bearing runs on - it has a little dimple of teflon or delrin at the centre. If you don't have that, ask Chris about it too.

I'm sure you'll be happy its a great TT.

Fran
  Reply With Quote
Old 5th October 2007, 03:42 PM   #7
Zen Mod is offline Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
My DIY Teres Turntable
Default Re: My DIY Teres Turntable

__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
  Reply With Quote
Old 5th October 2007, 03:54 PM   #8
Algar_emi is offline Algar_emi  Canada
diyAudio Member
 
Algar_emi's Avatar
 
Join Date: Oct 2002
Location: Canada, Qc
My DIY Teres Turntable
Thanks for the info everyone. I'm really counting on your community help to get this project up and running. Yes, I got the Delrin pad (white little disk) with the rest of the bearing parts. I'll try to call Chris, thanks for the tips.
  Reply With Quote
Old 5th October 2007, 05:41 PM   #9
shokunin is offline shokunin
diyAudio Member
 
Join Date: Dec 2002
Location: California
The black disc is the spacer between the platter and record then clamp. The white disc (teflon) goes into the bearing.
  Reply With Quote
Old 5th October 2007, 08:16 PM   #10
woodturner-fran is offline woodturner-fran  Ireland
diyAudio Member
 
Join Date: Jan 2006
Location: Ireland
Oh yeah, I see that white disc now. I don't think thats the best solution for your thrust plate. If you're talking to Chris, get him to send you a new one - its brass and a lot more rigid.


Fran
  Reply With Quote

Reply


My DIY Teres TurntableHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My Teres and DIY tone arm Paul Ebert Analogue Source 47 9th June 2011 02:57 AM
Teres Turntable bearing 2008 group buy wirewiggler Group Buys 185 10th May 2009 03:11 AM
FS: New Teres Turntable Platter and Bearing Assembly jdubs Swap Meet 0 23rd October 2004 09:22 PM


New To Site? Need Help?

All times are GMT. The time now is 11:00 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki