Shure cartridge info. and differences.

tubewade · 16th August 2007, 06:49 PM

For many years I used Shure M75 series cartridges on my tables. I eventually switched the styli on all of them to N75-EDT2 or N75-EJ. At some point I have purchased a Realistic/Shure R25-ED and a Realistic/Shure R47-XT. Do these share the same coils and internals as the M75-EDT2? The R47-XT has a much wider body similar to the M97-XE I am presently using on my Linn table. Who can tell me something about the differences and similarities between M75, M95 and M97 series cartridges and also where their Realistic branded counterparts fit into the picture?

Best regards,

Wade

h_a · 28th August 2007, 02:34 PM

Surf over to the Cartridge database which has as always all data on all carts you are interested in.

Have fun reading!

All the best, Hannes

nuvistor · 28th August 2007, 05:45 PM

Look at the forums at:

www.vinylengine.com

tubewade · 29th August 2007, 04:28 AM

Thank you very much, both of you. That was the information I was looking for!

Best,

Wade

16th August 2007, 06:49 PM	#1
tubewade diyAudio Member Join Date: Jun 2007	Shure cartridge info. and differences. For many years I used Shure M75 series cartridges on my tables. I eventually switched the styli on all of them to N75-EDT2 or N75-EJ. At some point I have purchased a Realistic/Shure R25-ED and a Realistic/Shure R47-XT. Do these share the same coils and internals as the M75-EDT2? The R47-XT has a much wider body similar to the M97-XE I am presently using on my Linn table. Who can tell me something about the differences and similarities between M75, M95 and M97 series cartridges and also where their Realistic branded counterparts fit into the picture? Best regards, Wade

28th August 2007, 02:34 PM	#2
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	Surf over to the Cartridge database which has as always all data on all carts you are interested in. Have fun reading! All the best, Hannes __________________ fresh matched IRFP240/IRFP9240 fets \|\| AlephJ/JX-kits F5 transistor kits \|\| Burning Amp BA-1/2/3 transistor kits

28th August 2007, 05:45 PM	#3
nuvistor diyAudio Member Join Date: Jun 2004 Location: Richmond CA	vinylengine.com Look at the forums at: www.vinylengine.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Empire 2004 cartridge info	percy	Analogue Source	5	9th October 2011 10:10 PM
Info on Decca cartridge loading sought.	Aleksunder	Analogue Source	6	30th November 2006 12:52 AM
Info on Toshiba Opti Cartridge plz?	Steerpike	Analogue Source	5	24th September 2006 09:54 PM
Shure M31	jaudio	Analogue Source	1	6th July 2006 08:59 PM
Shure V15 Type III or Grado Gold Phono Cartridge	mig-ru	Analogue Source	31	23rd March 2004 07:45 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th August 2007, 04:28 AM	#4
tubewade diyAudio Member Join Date: Jun 2007	Thank you very much, both of you. That was the information I was looking for! Best, Wade

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read