diyAudio (
-   Analogue Source (
-   -   rewire Rega RB250 (

dafdesign 6th August 2007 02:41 PM

rewire Rega RB250
I am in the middle of rewiring my Rega planar 3 tonearm I have the new tonearm wires red, white, blue, green & ground which I will solder directly to the interconnect per the instructions "HOT WIRED REGA "Frank of audiophil, My problem is
I don't know what goes to what the interconnect I purchased has Right channel (1-Red rca with blk & wht bare wires at other end) and Left channel (1-Black rca with bare blk. & wht. wires at other end) the ground is a seperate wire i know what that connects to but can anybody help with connecting the red/wht/green/blue - to - Left (blk. & wht.) and Right blk.&wht.)?

coolmaster 6th August 2007 03:59 PM

2 Attachment(s)
This should be it

dafdesign 6th August 2007 06:57 PM

Perfect thats exactly what I needed, thanks very helpful

coolmaster 7th August 2007 04:13 AM

That's great!. I'd like to know how much improvement you've obtained after the mods/upgrades..

All times are GMT. The time now is 12:22 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio