Meridian 104 Tuner

richardsymes · 9th June 2007, 12:52 PM

Hi guys, I have just retrieved my Meridian 104 Tuner from the loft where it has been carefully stored for about 2 years. When it went up there it worked fine but now when I switch it on I get a hum through the speakers. I have checked all the obvious connections and they seem sound. The internal circuitry is very clean and tidy. I would very much like to use this classic piece of kit again so any suggestions are most welcome!

Thanks,

Richard.

raindog · 13th June 2007, 07:20 PM

Hi Richard, check the electrolytic capacitors ( specially of the power supply ) and the ground connections of the signal wires. Hope this helps, good luck.

richardsymes · 13th June 2007, 07:37 PM

Hi, raindog,

Thank's very much for the advice! I shall certainly try that at the weekend, most of the components in the Meridian seem fairly 'off the shelf' I'll let you know how I get on as I have now decided to sell the 104 if I can get it working correctly.

Kind regards,

9th June 2007, 12:52 PM	#1
richardsymes diyAudio Member Join Date: Mar 2005 Location: Derby	Meridian 104 Tuner Hi guys, I have just retrieved my Meridian 104 Tuner from the loft where it has been carefully stored for about 2 years. When it went up there it worked fine but now when I switch it on I get a hum through the speakers. I have checked all the obvious connections and they seem sound. The internal circuitry is very clean and tidy. I would very much like to use this classic piece of kit again so any suggestions are most welcome! Thanks, Richard. __________________ Richard

13th June 2007, 07:37 PM	#3
richardsymes diyAudio Member Join Date: Mar 2005 Location: Derby	Hi, raindog, Thank's very much for the advice! I shall certainly try that at the weekend, most of the components in the Meridian seem fairly 'off the shelf' I'll let you know how I get on as I have now decided to sell the 104 if I can get it working correctly. Kind regards, __________________ Richard

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Meridian 565 mod	PWatts	Digital Source	1	5th January 2012 07:55 AM
Meridian Tuner 204	etsang3	Solid State	8	5th March 2011 04:08 PM
Meridian MCD	barry.childs	Solid State	9	14th March 2010 03:10 PM
Larsholt fm tuner front end for JLH tuner design-Any still available?	djsb	Analogue Source	0	25th December 2008 04:46 PM
Meridian 508-20	Richard984	Digital Source	14	2nd February 2008 09:49 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th June 2007, 07:20 PM	#2
raindog diyAudio Member Join Date: May 2003 Location: Timisoara	Hi Richard, check the electrolytic capacitors ( specially of the power supply ) and the ground connections of the signal wires. Hope this helps, good luck.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)