Sony TC-645 tape recorder mod - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th June 2007, 12:10 PM   #1
oshifis is offline oshifis  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
Default Sony TC-645 tape recorder mod

I own a Sony 3-motor 3-head tape recorder and I would like to modify it. The problem is the supply reel has a primitive friction torque regulator that does not work perfectly. The phase between the L and R channel varies, but it is stable if I brake the supply reel by hand. Also at fast winding the supply reel is free running, and the tape is taken up loosely. I am thinking about a mod where the supply reel motor gets some voltage (like the takeup reel does) that would provide some torque in order to pull the tape. I think even unregulated it would work better than the current felt brake.

The idea is that the takeup reel motor gets full voltage for fast forward wind, and decreased voltage at playback. I want to do the same for the supply reel motor. Unfortunately I have no circuit diagram for the machine.

Could anybody give me some advice, how should I do the switchover to a lower voltage? I do not want to trace back the takeup motor circuitry, only as an ultimate solution. I think most 3-motor Sony tape recorder circuitry of that product range is similar, being only cosmetic difference, so any other Sony circuit diagram will give some idea.
  Reply With Quote
Old 27th June 2008, 06:51 PM   #2
diyAudio Member
 
Join Date: Jun 2008
Default TC645 schematics

Are you still looking for schematics of the Sony TC-645 open reel deck?

Message me with an e-mail address and I'll upload scans of the service manual to megaupload or another bulk fileshare service.
  Reply With Quote
Old 28th June 2008, 06:18 PM   #3
oshifis is offline oshifis  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
Hi circuitexplorer,

Thanks for your kind offer. I was able to calibrate the machine, and I would like to modify the tension reel motor circuit. I could not send you an email via the forum, therefore pls contact me, my email is lcsaszar at freemail dot hu TIA Laszlo
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
AV IR over Cat5 (simple audio/video repeater for Sky, Digital Tv and Tape recorder) audiodesign Solid State 0 24th June 2009 02:28 PM
Source for Bogen tape recorder heads? jacques54 Analogue Source 1 22nd April 2008 06:52 AM
Brush Soundmirror early tape recorder? jacques54 Analogue Source 1 13th January 2008 09:06 PM
looking for TCM5000 sony tape recorder service manual liquias Solid State 0 8th July 2004 08:34 PM
About tube tape recorder heads walk Tubes / Valves 10 28th September 2002 10:22 PM


New To Site? Need Help?

All times are GMT. The time now is 01:13 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2