Lightspeed Attenuator a new passive preamp - Page 523 - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th August 2014, 04:37 PM   #5221
udailey is offline udailey  United States
diyAudio Member
 
Join Date: Mar 2008
Yes, capacitors are the reason I didnt want to inject DC into the signal. With big enough transformer you could do that if the transformer is on the output of the ldrs.
Uriah
__________________
purchase LDRs anytime Also try my Resistor Replacers or LDR based Input Selector Email me. diyldr@gmail.com
  Reply With Quote
Old 28th August 2014, 04:39 PM   #5222
udailey is offline udailey  United States
diyAudio Member
 
Join Date: Mar 2008
Or use opamps after and a DC servo after first opamp.Of course then you're using opamps.
__________________
purchase LDRs anytime Also try my Resistor Replacers or LDR based Input Selector Email me. diyldr@gmail.com
  Reply With Quote
Old 28th August 2014, 07:42 PM   #5223
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Blog Entries: 2
My idea allows for the construction of multi-channel LDR attentuators without having to match any LDRs - but that would get expensive quickly if it required several high performance transformers. Capacitors is the only option for the idea I had.
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote
Old 28th August 2014, 07:52 PM   #5224
udailey is offline udailey  United States
diyAudio Member
 
Join Date: Mar 2008
Well you should build it. Dont let me or George make you feel you shouldn't. It'll still sound good. Maybe not as great as not cap but good is good.
__________________
purchase LDRs anytime Also try my Resistor Replacers or LDR based Input Selector Email me. diyldr@gmail.com
  Reply With Quote
Old 1st September 2014, 10:29 PM   #5225
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
Blog Entries: 1
Send a message via Yahoo to vdi_nenna
Hi,

Was hoping someone could help me with this project. I didn't have the schematic for the board, so I used the basic schematic by George found online and in the thread.
The board says Design and layout Uriah Daily 2009.

I'm getting some audio from channel 2, but only hum from channel 1.
Think I might have the optocouplers in wrong.

Using 100 ohm for resistors and 5k pots. Volume adjustment is 100k.
Using 12v walwart and regulated down to 5v.

If I turn volume up all the way get audio from 1ch that's low but not distorted.
Other channel is just him.

Thanks for any advise or proper schematic would be helpful too.

Vince
Attached Images
File Type: jpg LS_01.jpg (149.2 KB, 245 views)
File Type: jpg LS_02.jpg (151.7 KB, 241 views)
File Type: jpg LS_03.jpg (152.9 KB, 238 views)
File Type: jpg LS_05.jpg (150.4 KB, 235 views)
File Type: jpg LS_06.jpg (149.6 KB, 231 views)
__________________
I build, therefore I am.

Last edited by vdi_nenna; 1st September 2014 at 10:31 PM.
  Reply With Quote
Old 5th September 2014, 02:48 PM   #5226
udailey is offline udailey  United States
diyAudio Member
 
Join Date: Mar 2008
Vince
I cant attach the file as its a few Kb larger than allowed.

Okay, linked pdf manual here:
https://drive.google.com/file/d/0B0N...it?usp=sharing

First schematic is George's original. Last is the schematic that represents the board you have.
__________________
purchase LDRs anytime Also try my Resistor Replacers or LDR based Input Selector Email me. diyldr@gmail.com
  Reply With Quote
Old 5th September 2014, 03:58 PM   #5227
diyAudio Member
 
merlin2069er's Avatar
 
Join Date: Sep 2008
Location: Toronto
Blog Entries: 1
Send a message via MSN to merlin2069er
Hey Uriah, have any of those boards?
  Reply With Quote
Old 5th September 2014, 04:40 PM   #5228
udailey is offline udailey  United States
diyAudio Member
 
Join Date: Mar 2008
Hi
No I dont
__________________
purchase LDRs anytime Also try my Resistor Replacers or LDR based Input Selector Email me. diyldr@gmail.com
  Reply With Quote
Old 5th September 2014, 04:56 PM   #5229
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
Blog Entries: 1
Send a message via Yahoo to vdi_nenna
Thanks for the doc! I had since built a version based on George's schematic and it works fine. Hand wired it in 2.5 hours. But, now that I have this doc, I will build one for a friend using the board. Now just need to match some LDRs.

Thanks,

Vince
Attached Images
File Type: jpg LS_Atten_02.jpg (161.3 KB, 72 views)
__________________
I build, therefore I am.
  Reply With Quote
Old 10th September 2014, 07:37 AM   #5230
diyAudio Member
 
Join Date: Nov 2009
Location: UK, Manchester
cheers!
a quick question about the wall wart, will this fit? I'll install LM317 after it and set the current to 150-200mA and then U7805 as advised.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 02:26 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2