|Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|15th February 2014, 07:21 PM||#1|
Join Date: Feb 2014
3 channel quad mixer with front to rear pan
I have some electronics history, but audio is way above my head. this is why I would appreciate your input in my latest project.
I will end up with a quad amplifier based on 2xSTK463 and currently I'm designing the mixer stage. the idea is to be able to use front + rear output from a PC, a spdif -> DAC output and a random line out, control their volume via a few PGA2311s, mix them all up with some OPA2134s and deliver that to the final amplifier. also one of the PGAs is supposed to pan the sound from front to back in case we only have stereo input.
can someone please tell me if I do something wrong in this circuit?
also the OPA2134's datasheet talks about increased distorsion in case of "unmatched source impedances greater than 2k". is there something to be done about this as far as those buffers are concerned? since have no idea of the output impedance of a PC soundcard or a black-box spdif DAC. the above image only contains the audio path for the mixer. the rest of the project is being developed here: https://github.com/rodan/ampy
Last edited by petertux; 15th February 2014 at 07:54 PM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Rear or front port?||Speek||Multi-Way||1||7th September 2005 09:58 AM|
|Front or Rear Ports||s_c_leach||Multi-Way||9||15th May 2005 01:17 PM|
|front or rear port||blu_line||Multi-Way||3||12th March 2004 02:20 PM|
|searching software to switch front speakers to rear and rear to front!-dolby surround||MCM||Everything Else||6||6th February 2004 10:29 PM|
|Rear vs. Front Port||squidbait||Multi-Way||11||21st January 2004 01:10 AM|
|New To Site?||Need Help?|