If you don't want to build one, here's one that I have used.
Looks like DSP relays...might be low current but not what I would call signal relays.
Relays to use:
IM relays (IM07 is 24V coil) are min 100uV
(mickeymoose)
G6A-274P-ST are min 10uA / 10mV min signal
G6K or G6S series are also min 10uA / 10mV min signal
Signal relays or Telecom relays are what to look for.
Look for low switching voltage in the data sheet.
Last edited:
Then again, what do I know?Looks like DSP relays...might be low current but not what I would call signal relays.
Relays to use:
IM relays (IM07 is 24V coil) are min 100uV
(mickeymoose)
G6A-274P-ST are min 10uA / 10mV min signal
G6K or G6S series are also min 10uA / 10mV min signal
Signal relays or Telecom relays are what to look for.
Look for low switching voltage in the data sheet.
What's different in posts 6 & 8 that got a "thank you", from post4 that you rubbished?
was in a hurry because i went on vacation... sorry... thanks for your reply too
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Analog Line Level
- Simple non-digital input selector