3-way signal splitter - Page 2 - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th June 2013, 04:32 PM   #11
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
Perhaps you should ask Bryston why their preamp appears not to be able to meet its spec. 30ft of cable could give a capacitance of 1nF. Probably a bit high for many preamps, but Bryston claim theirs can drive 600 ohms. 1nF at 20kHz is 8k reactance, so small by comparison. Perhaps their output stage can't cope with a capacitive load and is verging on instability?
  Reply With Quote
Old 19th June 2013, 04:41 PM   #12
diyAudio Member
 
Speedskater's Avatar
 
Join Date: Sep 2002
Location: Lakewood, Ohio
I lost track. Is this an unbalanced or balanced system?
If it's balanced, are the 3 inputs identical?
__________________
Kevin
  Reply With Quote
Old 19th June 2013, 04:53 PM   #13
SashaV is offline SashaV  Canada
diyAudio Member
 
Join Date: Feb 2006
Location: Toronto
It is balanced and 3 inputs are identical (6B SST).
  Reply With Quote
Old 19th June 2013, 04:59 PM   #14
diyAudio Member
 
Speedskater's Avatar
 
Join Date: Sep 2002
Location: Lakewood, Ohio
This is a 10 year old paper by Jim Brown on balanced splitters.

'Mic Splitters'
http://www.audiosystemsgroup.com/Mic_Splitters.pdf
__________________
Kevin
  Reply With Quote
Old 10th July 2013, 01:40 PM   #15
diyAudio Member
 
Join Date: Jul 2013
Hi,
We have tons of WSW 811453C (Siemens IA) modules, I would like to use some of them for splitting line and maybe instrument signals. Anyone knows output impedance?
I am sure they can drive 600 Ohms, they where also used for exactly this purpose in the internal distribution system of the ORF (Austrian Broadcasting), as far as I know.
But that seemed to have included an additional resistor network. I don't know if this makes sense.
I hope there is a way to get this to work without too much complication...
Interesting topic for studio owners!
Cheers
Richard
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
signal splitter matej8888 Digital Line Level 7 11th November 2011 07:29 PM
Audio Y Splitter Not Splitting Signal Properly jeffbruce Everything Else 8 28th September 2011 08:28 PM
signal splitter buffer hozone Analog Line Level 8 19th July 2010 11:14 AM
Audio signal splitter (for preamp) Krislarsen Analog Line Level 3 21st February 2006 12:25 PM
Creating a differential signal from a single-ended signal for bridged amps Peter Daniel Chip Amps 45 8th November 2004 12:47 PM


New To Site? Need Help?

All times are GMT. The time now is 05:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2