diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analog Line Level (http://www.diyaudio.com/forums/analog-line-level/)
-   -   Tried active crossover, mean hum... (http://www.diyaudio.com/forums/analog-line-level/229491-tried-active-crossover-mean-hum.html)

mortron 6th February 2013 09:43 PM

Tried active crossover, mean hum...
 
I just tried my active crossover out that I purchased, and using homemade cables, I am running unbalanced lines, XLR one end, and RCA on the other.

When I connect everything, there is a hum in my system from the crossover, but the preamp also contributed, as when I disconnected the inputs into the XO, some of the hum went away, but not all. Is there a possible mismatch in my system or is there a bigger issue?

Denon Cd deck > Bottlehead Quickie Preamp > Ashly XR2000 crossover > Denon POA 2400 amp > Speakers.

Anyone have any theories? I have lifted the ground from the XO, but it still hums.

mortron 7th February 2013 05:17 PM

Solved my hum problem... Now I have only one channel operating on the XO. So far I am skeptical of the unit. Is there any way to further diagnose this without using my amp? Thanks.


All times are GMT. The time now is 09:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2