Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

How can I split a mixer bus?
How can I split a mixer bus?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th February 2013, 06:40 PM   #11
denimboy is offline denimboy
diyAudio Member
 
Join Date: Feb 2013
Quote:
Originally Posted by cbdb View Post
you dont need the extra buffers, the summing amps are all you need, you just have to rewire the inputs to the summing amps, omitting channel 3 from the head phone amp. Are you sure the section wth the discrete transistors is not the HP amp?
You're right. My schematic is wrong. The part with transistors is the HP amp (verified on PCB).

However I'm not sure I understand your first statement. You mean if I remove the connection from CH 3 to HP amp it will work? I thought the signal would reach it through the center bus (where Channel 1, 2, 3 connects with Master Out and HP Out on the same wire.) See original schematic.
  Reply With Quote
Old 18th February 2013, 01:24 PM   #12
denimboy is offline denimboy
diyAudio Member
 
Join Date: Feb 2013
bump!

Here's the mod schematic with the right labels
Click the image to open in full size.

So far, the buffer itself is working. I can mix both Ch. 1 and 2. I'm using a BA4560 and a 10k feedback resistor (best results).

What doesn't work:

- Simply wiring Ch. 3 to the buffer output doesn't work. I no longer read the buffer input signals (Ch 1 & 2).

- A 100k resistor (best results) from buffer output to ground is needed to get a clean signal into Master input.

- With everything wired, the Master output is clipping really bad.


Can anyone clarifying what cbdb is saying? How can I use the summing amps only?
  Reply With Quote

Reply


How can I split a mixer bus?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
i2s bus vs. i2c bus Doovieman Digital Source 9 5th February 2013 02:08 PM
Buying a sub - split or not to split the preout dalys1234 Car Audio 3 11th June 2011 10:31 PM
Bus pumping durwood Class D 9 16th April 2010 12:16 PM
Are there different i2S Bus ? caine28 Digital Source 0 4th October 2009 09:39 PM


New To Site? Need Help?

All times are GMT. The time now is 05:10 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki