diyAudio (
-   Analog Line Level (
-   -   6dB Active crossover (

argonrepublic 30th January 2013 07:07 PM

6dB Active crossover
I am assembling a pair of Dynaudio FOCCUS. The dynaudio recommended slope is 6dB. I was hoping to use active crossovers because I have a pair of amps that I can install in the speaker. I have at my disposal a decent Phoenix gold car crossover and I have seen crossover PCB/ kits on ebay. Most of what I see is 18dB or 24dB. Can I modify them? What effect can I expect by changing the slope or not changing the slope. My drivers are Dynaudio 17W75 and Dynaudio D28/2.

sreten 30th January 2013 07:21 PM


Passive line level 6dB slopes are easy if you know what you are doing,
you don't need an active x/o, and can use nearly all power amplifiers.

Search on PLLXO's.

rgds, sreten.

argonrepublic 30th January 2013 07:23 PM

What is a doddle?

planet10 30th January 2013 08:45 PM

Doodle is easy. No active components - 3 small passives/channel. So cheap and clean. Ideally you have gain control on at least 1 of the amps.

Start Here: | Passive Line-Level Crossover


All times are GMT. The time now is 08:05 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio