diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analog Line Level (http://www.diyaudio.com/forums/analog-line-level/)
-   -   McIntosh/Conrad Johnson pairing (http://www.diyaudio.com/forums/analog-line-level/228865-mcintosh-conrad-johnson-pairing.html)

blackxero 28th January 2013 09:05 PM

McIntosh/Conrad Johnson pairing
 
I'm swapping out my tube power amp for a solid state McIntosh unit temporarily. My tube pre is a Conrad Johnson PV-1. Can someone please tell me which input setting on the McIntosh power amp is appropriate for pairing with this CJ preamp? It has settings for .75 volts and 2.5 volts.

Thanks!

SY 28th January 2013 10:40 PM

I'd start with the 2.5V setting- if you have to wind the volume up to full and it's still not loud enough, then switch to 0.75V. Contrary to psychology, it's fine to have the preamp volume control turned up well past 12:00.:D


All times are GMT. The time now is 09:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2