|Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|3rd January 2013, 11:08 PM||#1|
Join Date: Nov 2012
Speaker Combination in Custom Installation, please help
I have some doubts when connecting multiple speakers in a one channel one amplifier, and using capacitors as 6th order crossovers on some of the speakers in a series/parallel combination.
Heres the deal, I have the following speakers:
4 - Beyma 8m/nd midrange speakers 4 ohm
4 - Beyma 10mi100 midrange speakers 8 ohm
I know they are diffrent speakers, but for now they are all going to be connected in the same amplifier until I have the money to buy a separate anp.. If needed
The 8m/nd 8" speakers need to be high passed at about 330 hz, so I bought a Solem 120uf 250v capacitor for each.
The 10mi100 speakers are going to be high passed at 125hz with the active crossover that is connected to the amplifier's rca imput.
Heres the series/parallel diagram Im thinking of using:
- all 4 8" speakers in series for 16ohm
- two pairs of 10" speakers in series for 16 ohm each pair
- then all parallel for a final impedance of 5.33 ohm
My question is if the cutoff frecuency that each cap gives to each of the 8" speakers would be affected when connecting them all 4 in series?
Would the 10" speakers be affected with the capacitors?
Any other concerns I need to lookout when using this combination?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Speaker binding post installation.||robbbby||Construction Tips||6||3rd March 2012 06:29 AM|
|Trade Custom Speaker Horns for Custom Amp||brsanko||Tubes / Valves||3||6th July 2010 06:32 AM|
|PA speaker installation||east electronics||PA Systems||3||5th June 2010 03:09 PM|
|Opinions wanted: best speaker/combination to render voice?||SunShade||Multi-Way||11||30th September 2007 01:11 PM|
|Chipclone and speaker: suggestions for a perfect combination?||Franz G||Chip Amps||104||6th November 2004 01:34 AM|
|New To Site?||Need Help?|