After search...need schematic to stereo preamp with only 4 bjt transistors

[WhiteRhino]

I did excatctly like this .

I used only 2 transistors , BC550c NPN and BC556 PNP

 

[Mooly]

So using the values you have we get the following...

Look how the 0.47uf cap limits the low frequency response and how raising it extends the response. An electroylitic is fine here (watch polarity).

Also see how the response of the amplifier falls at high frequecies. With the higher gain the 100pf cap is limiting the bandwidth. Look at the difference between 100pf and 22pf.

Five screenshots showing this,

1) Output Max. Your amp as it stands into 100k
2) Response. Your amp.
3) Response larger value C1 shows extended LF response.
4) 50Khz squarewave. Your amp as it stands.
5) Lower value of C2. Extends the HF response.

 

[WhiteRhino]

thanks mooly , i will do that ,
I will put 4.7uf instead of 0.47
and 22P instead of 100p

 

[sreten]

Hi, have look at Minimalist Discrete Hi-Fi Preamp , note the supply, rgds, sreten.

 

[WhiteRhino]

Thanks look very interesting maybe I will build it some day
For now I will stay with the radford design
Have a nice day