Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

HELP differntial audio
HELP differntial audio
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 4th July 2012, 08:23 AM   #1
mitchjs is offline mitchjs  United States
diyAudio Member
Join Date: Oct 2004
Default HELP differntial audio

Im building a project, that uses Bluegiga's WT32 (bluetooth audio)
and it provides 2vp-p differential audio outputs...
Id like to use a TI DRV632, looking at the eval, and the data sheet
i see a bunch of filter components... i dont think i need any of that(cause it says its filtered)
i just need to get the differential audio to single ended to be able to plug into PC audio LINE in...

so, what would be the minimum components for the DRV632's imput... im assuming dc decoupling caps, and some resistors to set the gain on the input

im not a analog guy, so i need some help here

for reference: Line Driver / Receiver - 2V/3Vrms Line Driver - DRV632 - TI.com

from WT32 datasheet:
The output circuit is comprised of a digital to analogue converter with gain setting and an
output amplifier. Its class AB output stage is capable of driving a signal on both channels
of up to 2V pk-pk differential into a load of 16Ω. The output is available as a differential
signal between AUDIO_OUT_N_LEFT and AUDIO_OUT_P_LEFT for the left channel, as
Figure 20 shows; and between AUDIO_OUT_N_RIGHT and AUDIO_OUT_P_RIGHT for the
right channel.
The multi-bit bit stream from the digital circuitry is low pass filtered by a third order filter
with a pole at 20kHz. The signal is then amplified in the fully differential output stage,
which has a gain bandwidth of typically 1MHz.
  Reply With Quote


HELP differntial audioHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Dodd Audio built Class D Audio/SDS 254 kregg007 Swap Meet 0 14th November 2011 12:14 AM
Good books or videos on audio production, audio engineering, or audio editing tunks14 Everything Else 0 15th April 2011 10:00 PM
Audio humor. Wattgate 381 Audio Grade Duplex Socket Pano Parts 18 17th March 2010 07:04 PM
For Sale Or Trade: Adire Audio Brahma, Rythmik Audio Plate Amp tmort Swap Meet 5 27th June 2009 12:29 AM

New To Site? Need Help?

All times are GMT. The time now is 01:14 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio