diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analog Line Level (http://www.diyaudio.com/forums/analog-line-level/)
-   -   Dyanmic mic to electret type input (http://www.diyaudio.com/forums/analog-line-level/214211-dyanmic-mic-electret-type-input.html)

qdjs 10th June 2012 12:06 PM

Dyanmic mic to electret type input
 
I provide sound for a local air show and I have been asked if i can provide conversation between the announcer and the pilot.
I know I can do this by used of a scanner connected to the pa mixer but the announcer would have to hold two mics to his mouth in order to do this (one for the radio and one for the pa). I would like to do this by feeding the dyanmic mic signal into a handheld aircraft radio using a ptt switch for the annoucer to key the xmitter. --Any suggestions ???


All times are GMT. The time now is 10:20 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2