diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analog Line Level (http://www.diyaudio.com/forums/analog-line-level/)
-   -   combine active xo and parametric eq (http://www.diyaudio.com/forums/analog-line-level/213276-combine-active-xo-parametric-eq.html)

tinitus 24th May 2012 11:52 PM

combine active xo and parametric eq
 
anyone tried it ?

tinitus 25th May 2012 10:35 AM

ehh, the parametric would be a notch filter

on second thought, make it active xo, with 'reversed' graphic EQ, and optional parametric notch/peak filters

the 'reverse' trick
to use tweeter attenuation for the woofer low pass filters
and using a bass attenuation with the high pass filters

surely this must have been done before ?

AndrewT 25th May 2012 02:03 PM

The old Threads at
http://www.diyaudio.com/forums/analo...ight=crossover
or
http://www.diyaudio.com/forums/analo...ight=crossover
or
http://www.diyaudio.com/forums/analo...?highlight=mox
or
http://www.diyaudio.com/forums/group...?highlight=mox
or
http://www.diyaudio.com/forums/solid...?highlight=mox

tinitus 25th May 2012 08:43 PM

a flexible active xo, I guess there's a first time for everything

is it because those who design the electronics have very little knowledge about speakers
and speaker designers, well.....

but with new digital technology, maybe a bit late for this
but i still intend to try a figure it out

tinitus 26th May 2012 06:04 AM

well, its been said before, there ain't no 12db Linkwitz Riley filter

12dB / Octave Linkwitz Riley Crossover

http://sound.westhost.com/project78.htm

I wonder how other 12db active LR filters look like :confused:

tinitus 26th May 2012 08:04 AM

hang on

ehh, Elliot use half his 3way 24db LR filter for the 12db LR project

maybe we could simple use the other half, so that each slope will have their own dedicated EQ :scratch2: :confused:

I'm in over my head here :eek::h_ache: and think I better let this one go now :o

tinitus 26th May 2012 08:49 AM

I sent a note(mail) to ESP about this

AndrewT 26th May 2012 11:36 AM

Read the Linkwitz site for first hand information on the many EQs available for speaker crossovers and effects.

tinitus 26th May 2012 01:54 PM

2 Attachment(s)
yeah, I know its well described by Linkwitz
and wont hurt to read it again, and again
tho Im not very good at reading, and calculations even worse
Im not very well educated

Im looking at this schematic from ESP site, project 28
Parametric and Sub-Woofer Equaliser

and his project 09, crossover
Linkwitz-Riley Electronic Crossover

the same board is used for the 12db LR filter
they both look very similar to me

tinitus 26th May 2012 03:36 PM

well, I remember sometimes reading about active xo modules, they say may also be configured like ....

never thought much about it before, but now...?


All times are GMT. The time now is 12:25 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2