Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Electret microphone Pre-amp
Electret microphone Pre-amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th December 2011, 02:48 PM   #1
nyk is offline nyk
diyAudio Member
 
Join Date: Dec 2011
Default Electret microphone Pre-amp

Hi all!!

I am using this microphone as mentioned in my last thread (http://www.diyaudio.com/forums/instr...icrophone.html).

We built a common pre-amp circuit(Audio Preamplifier | Op-Amp Mic Preamp) and it was not working.
We got the output of the OPAMP as 'HIGH' always i.e. around 12V(Vcc) and not as varying ac signal.

We also tried with the other but similar circuit(pics attached) but still no response.

Can anybody please help as to how to make it work or as to how to debug the fault in the circuit.......
Attached Images
File Type: png Electret mic preamp.PNG (6.8 KB, 146 views)
  Reply With Quote
Old 12th December 2011, 07:29 PM   #2
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Electret microphone Pre-amp
The voltage at pin 3 should be Vcc/2 which is 4.5 volts in your circuit.
Pin 6 should be identical to this voltage, as should pin 2. The setting of the pot has no effect on the DC conditions.
These voltages have to be correct.

If they are not then remove C2 and recheck.
If it is still not right then there is either a construction error or the opamp is duff.

For no audio output you may need much more gain than this depending on what you are feeding it into. If a mic capsule puts out 1mv then this circuit can only increase that to just over 20 millivolts. For a line input you need another gain stage after this to raise that 20mv to around 1 to 2 volts.
  Reply With Quote

Reply


Electret microphone Pre-ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Electret Microphone Capsules cm961 Parts 12 6th February 2012 11:24 AM
Electret microphone question zobsky Parts 23 14th May 2011 10:22 PM
DIY electret microphone capsule pre-amplifier EC8010 Analogue Source 4 26th October 2010 11:03 AM


New To Site? Need Help?

All times are GMT. The time now is 02:34 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki