Using INA217 for Microphone Pre-amp

[nyk]

Hi all!!

I am using a computer microphone for capturing audio.
I wish to use INA217 for amplification of the audio signal.

I tried by directly connecting mic outputs to the INA217 inputs, but I didn't get proper output. How should I use the INA217 to get the amplified audio signal??

My microphone is a computer one and also a directional one.
Help!!!

 

[UrSv]

Hi all!!

I am using a computer microphone for capturing audio.
I wish to use INA217 for amplification of the audio signal.

I tried by directly connecting mic outputs to the INA217 inputs, but I didn't get proper output. How should I use the INA217 to get the amplified audio signal??

My microphone is a computer one and also a directional one.
Help!!!

I would do it exactly according to the datasheet if you're a beginner. If P2P is not an option then there is actually an implementation PCB as per the datasheet available on eBay.

Ultra low noise low distortion bal mic amplifier PCB ! | eBay

I have no idea if the PCB is any good but I've seen it on eBay a couple of times...