remote control unit

jamfu · 19th November 2011, 03:45 PM

Hey guys, my dad had made me a preamp for a system he built for me. Unfortunately he died before he finished all the details. Many of you may have known him. His name was Bill. Anyhow, he put a remote control unit in the preamp. It is hooked up, but I do not know what kind it is and how I can get the information i need to make it function. Take a look at the picture i attached. Wondering if any of you can help out. Thanks in advance.

DrDyna · 19th November 2011, 04:13 PM

Is it this one?

Remote Control - Overview

jamfu · 19th November 2011, 04:17 PM

i believe it is

DrDyna · 19th November 2011, 04:21 PM

According to the information on the site, it looks like any universal remote that supports "Phillips" devices should work. You can probably get it going using the code search feature of the remote.

pinkmouse · 19th November 2011, 04:23 PM

Moved to correct forum

buzzforb · 19th November 2011, 04:27 PM

Hope the family is doing well. Bill is missed.

jamfu · 24th November 2011, 04:05 PM

Well I have to know when the power turns off and on inside the control for the remote to be programmed. Looks like I am going to have to learn the circuit before I can program the remote.The power is not hooked up to the remote pcb. It looks like i have toggle -> transformer for power. does it need to be parallel to function as one? Arrg

19th November 2011, 04:23 PM	#5
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Moved to correct forum __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

24th November 2011, 04:05 PM	#7
jamfu diyAudio Member Join Date: Nov 2011	remote Well I have to know when the power turns off and on inside the control for the remote to be programmed. Looks like I am going to have to learn the circuit before I can program the remote.The power is not hooked up to the remote pcb. It looks like i have toggle -> transformer for power. does it need to be parallel to function as one? Arrg

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
remote control unit	jamfu	Parts	2	19th November 2011 04:22 PM
Remote control receiver unit problem	Roushon	Everything Else	23	1st April 2011 07:32 AM
6 channel remote volume control unit	boudy	Swap Meet	5	7th June 2009 11:55 PM
Volume remote control unit	oldstyle	Everything Else	24	13th November 2002 04:28 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th November 2011, 04:13 PM	#2
DrDyna diyAudio Member Join Date: May 2007 Blog Entries: 3	Is it this one? Remote Control - Overview

19th November 2011, 04:17 PM	#3
jamfu diyAudio Member Join Date: Nov 2011	i believe it is

19th November 2011, 04:21 PM	#4
DrDyna diyAudio Member Join Date: May 2007 Blog Entries: 3	According to the information on the site, it looks like any universal remote that supports "Phillips" devices should work. You can probably get it going using the code search feature of the remote.

19th November 2011, 04:27 PM	#6
buzzforb diyAudio Member Join Date: Oct 2010 Location: Burlington, NC	Hope the family is doing well. Bill is missed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)