Adding an fx send/return to a mixer - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 25th October 2011, 03:18 PM   #1
diyAudio Member
Join Date: May 2011
Default Adding an fx send/return to a mixer


I want to add a mono fx send stereo return to a Presonus hp60 headphone amp:


The fx would affect the aux in only (1 send on each 6 channels) and be mixed back in stereo with the main common out.

Does anyone could give me a basic fx send plan? Sound quality don't have to be pristine and minimal mod and passive design would be preferable.

Thanks for any help!
  Reply With Quote
Old 25th October 2011, 03:38 PM   #2
diyAudio Member
Join Date: May 2011
I would even add that a simple switch "in 100% wet - out 100% dry" would do the job since I would do the balance with the fx unit. So a 6 channel A/B router to stereo summing and a circuit that mix the fx back...
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
line level fx - integrating them into standard fx pedal chain jmp220478 Instruments and Amps 1 13th February 2011 06:29 AM
Anyone up for adding 2 caps in his mouser order and send on to me ? coolnose Parts 2 6th December 2010 12:27 PM
my mixer berinhger UB 2222 FX Pro dead philsound Power Supplies 3 9th July 2009 06:22 PM
Adding a Pre-Fader Listen to Line Mixer FLD Parts 3 1st September 2008 02:27 PM
Where do you return your load? rgrayton Chip Amps 7 18th October 2005 01:17 PM

New To Site? Need Help?

All times are GMT. The time now is 03:27 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2