Anthem D2v Mod - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th October 2011, 11:58 PM   #1
diyAudio Member
 
Join Date: Sep 2011
Unhappy Anthem D2v Mod

I just had an Anthem D2v modified. The replaced the Op amps with OPA627 and the volume PGA2311 to PGA2310 running at 12 volts. I also added Bybee Quantum perifiers to the output of the regulated power supply. The top in is very detailed now. Acoustic guitar sounds very good with a lot of decay. Bass guitar very three dimensional, textured and tight. Male and female voices sound good. There are a few things that are bugging me and wondering if anyone has some ideas out there that I can change to improve the presentation.

Issues.

1. Depth of the soundstage seems to have been compressed. Before there seems to be more space between the singers and instruments playing on stage.
2. The music seems to be coming from the speakers in the upper midrange. Before the music was just there playing in space. If I'm a little to the right or left music falls to the right or left speaker when before I had to be quite a bit to the right or left before music collapsed to one side.
3. Width have been compressed a little but not as much as depth.
3. There is a little simbilance.
  Reply With Quote
Old 15th October 2011, 12:30 AM   #2
jam is offline jam  United States
diyAudio Member
 
jam's Avatar
 
Join Date: May 2001
Location: Auburn, CA, USA
Try removing the Bybee devices first.

Jam
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anthem Pre 2L: Potentiometer markmay Analog Line Level 2 27th May 2010 09:41 PM
Electrocompaniet or Anthem? philmagnotta Solid State 0 25th April 2010 08:43 PM
Anthem Amp 2 debugging help ronenash Solid State 20 23rd April 2010 01:09 PM
Understanding Anthem Amp2 output circuit ronenash Solid State 5 1st April 2010 01:16 PM
Anthem Integrated 1 Tube_Dude Tubes / Valves 9 19th June 2007 05:13 PM


New To Site? Need Help?

All times are GMT. The time now is 10:26 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2