Help needed with Paul Hynes VCCS - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th July 2011, 07:38 AM   #1
Marra is online now Marra  United Kingdom
diyAudio Member
 
Join Date: Nov 2009
Location: Near Lincoln
Default Help needed with Paul Hynes VCCS

I am building Pauls VCCS remote control LDR volume control and would like some advice regarding voltage readings in the remote control unit. The BSP149 mosfet is unavailable so the remote is the only bit completed so far. When powered up with the batteries led 3 lights up continually when I thought it was there to indicate a button being pressed. Have I cooked the i.c? tia.
  Reply With Quote
Old 13th July 2011, 07:49 AM   #2
heinz1 is offline heinz1  Europe
diyAudio Member
 
Join Date: Feb 2008
Hi Marra,
I can't help you very much since I am also waiting for parts to arrive. You might however ask your question in this thread

Infra Red Remote Control LDR Volume Control.
  Reply With Quote
Old 13th July 2011, 01:02 PM   #3
Marra is online now Marra  United Kingdom
diyAudio Member
 
Join Date: Nov 2009
Location: Near Lincoln
Thanks hienz1;Paul has kindly offered advice. Looks like it was the ic; swapped it out and led 3 now lights only when the keypad is pressed. I should have used a dil socket as I'd originally intended; just hope the other ic's are ok.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Paul Baran has died.... JoeDJ The Lounge 0 29th March 2011 05:36 PM
Paul Harvey is gone... moray james Everything Else 1 2nd March 2009 01:10 AM
VCCS filament supply for 813 Fuling Tubes / Valves 19 10th December 2008 05:53 PM
A VCCS tube amp, how? Nevod Tubes / Valves 9 18th February 2008 04:58 PM
Your opinion on this VCCS heater supply please. Bas Horneman Tubes / Valves 3 31st August 2005 09:23 PM


New To Site? Need Help?

All times are GMT. The time now is 10:24 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2