diyAudio (
-   Analog Line Level (
-   -   Help! needed a mic preamp for amplifier (

princenk007 29th March 2011 11:17 AM

Help! needed a mic preamp for amplifier
hello guys ,
I am new to this forum and new to electronics. I am urgently in need of a best quality mic preamp schematic with PCB layout for my diy stereo amplifier. The preamp should have at least 4*mic< Ahuja Sound Solutions > inputs with individual gain controls and a master control. and should have L/R individual output for the amp. And also should sound best with low distortion, full bandwidth and high gain. Please direct me to such a directory with full technical specifications.

thank you......

Speedskater 30th March 2011 12:20 AM

Those are dynamic microphones so no phantom power supply is needed.
Rod Elliott may have a suitable circuit.

Elliott Sound Products - The Audio Pages (Main Index)

princenk007 30th March 2011 03:54 PM

thanks for the link speedskater. i had already seen the mic preamps in that website.but the problem is i need a schematic that i can connect atleast 4 mics into the preamp and the preamp should have dual outputs for stereo amp input.

Speedskater 31st March 2011 09:09 PM

Try this mixer page:

Audio Signal Mixing

princenk007 4th May 2011 06:13 PM

thanks for replies. my problem is solved. this thread can be closed.

All times are GMT. The time now is 10:59 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2