Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Carver C-1 Preamp Output Voltage Issue
Carver C-1 Preamp Output Voltage Issue
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd March 2011, 12:45 PM   #1
fhawk618 is offline fhawk618  United States
diyAudio Member
fhawk618's Avatar
Join Date: Dec 2010
Location: Pittsburgh, PA
Default Carver C-1 Preamp Output Voltage Issue

I recently purchased a Carver C-1 preamp in excellent condition. It worked very well at first with no issues; however, it developed a low-level, high-pitched whine in the left channel, then spiked--sending the amp (M-1.5) into protection mode. The amp appears to be fine, but upon checking out the C-1, there is an extremely high 5.6-5.7V voltage showing on the left channel of both Main 1 and 2 outputs. This errant voltage is not impacted by changing any of the other controls on the unit (infrasonic filter, tone, volume, holography, etc.). The only control that has any effect is the speaker selector--when the speakers are disabled, the voltage drops to zero. Only the left channel is affected, and the voltage is only present on Main 1 and Main 2 outputs--no other outputs (tape, ext. processor).

I have been advised that this issue most likely stems from IC-7, or possibly IC-8. Any help would be greatly appreciated.

Thanks, Frank
  Reply With Quote


Carver C-1 Preamp Output Voltage IssueHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Voltage output issue with B1 Chris Adams Pass Labs 13 3rd October 2010 09:27 PM
Preamp output voltage limit ashlar Car Audio 2 2nd December 2008 12:41 PM
Preamp Power and Voltage Output ak_47_boy Tubes / Valves 2 18th June 2007 08:23 AM
Carver PM1.5 startup issue jimkarl Solid State 3 22nd November 2005 02:15 PM
6922 Output Voltage (GC Preamp) JPannell Chip Amps 2 27th April 2005 03:23 PM

New To Site? Need Help?

All times are GMT. The time now is 06:39 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio