Multi input (with phono) preamp kits?

captainobvious · 15th February 2010, 03:37 PM

I'm looking for suggestions for a budget friendly, but high performance preamp (tube or SS) for my system.

My speakers will be close to 90db efficient, and will be powered by gainclone amplifiers. The crossovers will be active via a Behringer DCX2496 unit.

The Behringer has balanced XLR inputs, so balanced outs on the preamp would be nice.

I'd like to find a DIY kit or prebuilt board (or heck, even a quality already built piece) that can accomodate several inputs, including a phono input.

Any suggestions are appreciated. Thanks.

captainobvious · 17th February 2010, 04:03 PM

Am I asking in the wrong place? I did try a search but didnt turn up the results I was hoping for.

Geosto · 17th February 2010, 06:41 PM

Maybe This is what you are looking fore?

captainobvious · 17th February 2010, 10:39 PM

very nice. Thank you.

danzup · 22nd February 2010, 05:43 AM

Or this :
Yet another Volume controlers and source selections
project nr.3 with 2 relais board offer 4 XLR input ...

15th February 2010, 03:37 PM	#1
captainobvious diyAudio Member Join Date: Jul 2008	Multi input (with phono) preamp kits? I'm looking for suggestions for a budget friendly, but high performance preamp (tube or SS) for my system. My speakers will be close to 90db efficient, and will be powered by gainclone amplifiers. The crossovers will be active via a Behringer DCX2496 unit. The Behringer has balanced XLR inputs, so balanced outs on the preamp would be nice. I'd like to find a DIY kit or prebuilt board (or heck, even a quality already built piece) that can accomodate several inputs, including a phono input. Any suggestions are appreciated. Thanks.

22nd February 2010, 05:43 AM	#5
danzup diyAudio Member Join Date: Oct 2007 Location: Bucuresti	Or this : Yet another Volume controlers and source selections project nr.3 with 2 relais board offer 4 XLR input ... __________________ There are not better tube than 6P3S and 6N2P for my ears !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swiss Physics model 5 preamp MM phono input	Eric Tang	Analogue Source	10	5th October 2010 01:53 PM
Input stage for multi-zone amp.	wsmckenz	Class D	2	2nd February 2010 11:45 PM
Transparent, Non-Microphonic Input Cap for Phono Preamp?	thermionic	Solid State	7	31st July 2008 09:17 PM
Shielding phono preamp input	leadbelly	Analogue Source	5	15th April 2008 06:03 PM
Modifying a tape head preamp for phono input.	roshan101	Analogue Source	2	16th April 2004 02:34 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th February 2010, 04:03 PM	#2
captainobvious diyAudio Member Join Date: Jul 2008	Am I asking in the wrong place? I did try a search but didnt turn up the results I was hoping for.

17th February 2010, 06:41 PM	#3
Geosto diyAudio Member Join Date: Jan 2009	Maybe This is what you are looking fore?

17th February 2010, 10:39 PM	#4
captainobvious diyAudio Member Join Date: Jul 2008	very nice. Thank you.