|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
5th February 2010, 08:41 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2009
|
SRPP+ from Glass Ware needs some help please
Hi,
I purchased kit from Glass Ware. It is SRPP+. I was thinking about using it as line stage or headphone amp. This is my first tube project so I'm overhelmed and I need help. I would like to use 6n1P tubes for this project. I'm not sure what the best option for power transformers is. I would like to use two separate trans for B+ and Heaters. I was thinking about getting 200V 100mA for B+ and 12.6V 2A for heaters. 12.6 can be converted by PSU on the board to 6.3V. I'm also getting confuse with all resistor values etc. PLEASE HELP. Thanks Darius. |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tube Cad from Glass-Ware questions | Tyimo | Tubes / Valves | 2 | 28th December 2007 02:07 PM |
| what glass-ware program? | jarthel | Tubes / Valves | 1 | 27th October 2006 09:38 AM |
| good free/soft ware for Mac? | brymway | Multi-Way | 1 | 3rd January 2004 12:05 AM |
| SRPP is....? | peranders | Tubes / Valves | 8 | 19th December 2003 08:38 PM |
| New To Site? | Need Help? |
