Need a Baxandall 2way tonecontroll

ConnyT42 · 29th December 2009, 09:31 PM

Need a Baxandall 2way tonecontrole ?

With a very nice pcb?????????
please with no op

Mooly · 2nd January 2010, 08:23 AM

You mean with no opamp... why ?

That limits you severely unless you design your own or use a single ended (AC) coupled design.
If you Google "Baxandall tone controls" there are countless designs, all much the same.

If you are prepared to put that aside, then this is far better IMO and is something I have been evaluating,
Anyone built/listened to D Selfs precision preamp.

ConnyT42 · 3rd January 2010, 02:58 PM

I préfere some good Transistor!
and it should working in a 2stage pre amp from elektor accu Pre amp
1997

29th December 2009, 09:31 PM	#1
ConnyT42 diyAudio Member Join Date: Nov 2009 Location: Blomberg	Need a Baxandall 2way tonecontroll Need a Baxandall 2way tonecontrole ? With a very nice pcb????????? please with no op

3rd January 2010, 02:58 PM	#3
ConnyT42 diyAudio Member Join Date: Nov 2009 Location: Blomberg	Tone control I préfere some good Transistor! and it should working in a 2stage pre amp from elektor accu Pre amp 1997

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Baxandall network	Craig405	Solid State	5	3rd September 2005 11:04 AM
baxandall tone control	9am53	Tubes / Valves	16	16th March 2005 07:44 PM
Baxandall Eq	brianti	Analogue Source	3	2nd November 2004 03:38 AM
Baxandall series	blmn	Solid State	24	16th May 2003 07:41 PM
3-band Baxandall	BoGoMiPz	Solid State	0	28th February 2002 12:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd January 2010, 08:23 AM	#2
Mooly diyAudio Member Join Date: Sep 2007	You mean with no opamp... why ? That limits you severely unless you design your own or use a single ended (AC) coupled design. If you Google "Baxandall tone controls" there are countless designs, all much the same. If you are prepared to put that aside, then this is far better IMO and is something I have been evaluating, Anyone built/listened to D Selfs precision preamp.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)