Can Someone help (Studiomaster mod)

[kinguk]

I have a Studiomaster 16-8-2 and need to do the internal jumper mod i.e from -10 to +4 I have a manual but it does not go into great detail on which caps to remove and jump. I have post this request on several website but as of yet no one can tell me there must be someone out there that knows please please help

 

[Netlist]

You have a link to the manual or can you upload the part that deals with the jumper settings?

Edit: moved to Line Level.

/Hugo

 

[kinguk]

All it says in the Manual is that you take two caps out and then jump with wire it does not say which two caps when I opened it up there is about 20 caps to each output.

 

[Netlist]

Right.

Here’s a fellow you might want to contact:
Tape Op Message Board :: View topic - Studiomaster Series II 40/8/2

/Hugo