Can Someone help (Studiomaster mod)

kinguk · 20th December 2009, 04:38 PM

I have a Studiomaster 16-8-2 and need to do the internal jumper mod i.e from -10 to +4 I have a manual but it does not go into great detail on which caps to remove and jump. I have post this request on several website but as of yet no one can tell me there must be someone out there that knows please please help

Netlist · 20th December 2009, 05:30 PM

You have a link to the manual or can you upload the part that deals with the jumper settings?

Edit: moved to Line Level.

/Hugo

kinguk · 20th December 2009, 05:40 PM

All it says in the Manual is that you take two caps out and then jump with wire it does not say which two caps when I opened it up there is about 20 caps to each output.

Netlist · 20th December 2009, 05:44 PM

Right.

Here’s a fellow you might want to contact:
Tape Op Message Board :: View topic - Studiomaster Series II 40/8/2

/Hugo

20th December 2009, 04:38 PM	#1
kinguk diyAudio Member Join Date: Dec 2009	Can Someone help (Studiomaster mod) I have a Studiomaster 16-8-2 and need to do the internal jumper mod i.e from -10 to +4 I have a manual but it does not go into great detail on which caps to remove and jump. I have post this request on several website but as of yet no one can tell me there must be someone out there that knows please please help

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
studiomaster vision8	burbeck	Solid State	19	20th January 2012 01:42 PM
Studiomaster mixers	norskfisker	Instruments and Amps	4	1st March 2009 09:26 PM
studiomaster schematics	krmaudio	Solid State	2	30th December 2008 08:32 AM
Studiomaster 400c	Pbassred	Solid State	3	25th October 2007 08:53 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th December 2009, 05:30 PM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	You have a link to the manual or can you upload the part that deals with the jumper settings? Edit: moved to Line Level. /Hugo

20th December 2009, 05:40 PM	#3
kinguk diyAudio Member Join Date: Dec 2009	All it says in the Manual is that you take two caps out and then jump with wire it does not say which two caps when I opened it up there is about 20 caps to each output.

20th December 2009, 05:44 PM	#4
Netlist diyAudio Moderator Join Date: Jan 2003	Right. Here’s a fellow you might want to contact: Tape Op Message Board :: View topic - Studiomaster Series II 40/8/2 /Hugo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)