Volume control

oon_the_kid · 25th August 2009, 04:54 AM

Hey!

I want ot be be the first guy to post in this spanking new thread.

I am looking for recommendation for a volume control that has remote control. I am looking at something that is totally built up or a kit. I have looked at some realy based sytem as well as a motor based system.

If you could put up a recommendation for me, it would be fantastic, it would be also good if you could mention why you like it, or dislike it. Like for example, one thing I dislike about the relay based control I've come across so far, is they loose their setting after power is turned off.

o

Many thanks in advance.

Oon

marchel · 12th September 2009, 02:28 AM

Hi ,

There are pot based remote volume control on ebay, I havent really tried them ,But I have a feeling that once you turn off the power , they will revert back to a near minimum volume when you turn them back on. Just like in my integrated amp with pot based remote VC. But it doesnt hurt to ask.

danzup · 12th September 2009, 08:30 AM

Yet another Volume controlers and source selections

oon_the_kid · 14th September 2009, 03:59 AM

Thanks for the info guys. I was looking at some relay based volume control as well.

Oon

Joao@AltheaMusica · 14th September 2009, 09:25 AM

Hello

maybe this is an option for you:
http://www.tentlabs.com/Products/page31/page31.html

Regards
Joao

marchel · 14th September 2009, 02:59 PM

Hello Danzup,

I would like to ask a question and I hope I'm not OT cause I've been OT in the "Ebay Hdam module" thread.

Does your relay based ATT suffer from audible click in the speaker ( not the relay) ?

Cause I have a similar ATT I bought off ebay, And It has audible on the speaker click at only 2 points in its attenuation range.

danzup · 15th September 2009, 08:16 AM

@marchel : response given in my thread , check there !
No thread jacking .

25th August 2009, 04:54 AM	#1
oon_the_kid diyAudio Member Join Date: May 2008	Volume control Hey! I want ot be be the first guy to post in this spanking new thread. I am looking for recommendation for a volume control that has remote control. I am looking at something that is totally built up or a kit. I have looked at some realy based sytem as well as a motor based system. If you could put up a recommendation for me, it would be fantastic, it would be also good if you could mention why you like it, or dislike it. Like for example, one thing I dislike about the relay based control I've come across so far, is they loose their setting after power is turned off.o Many thanks in advance. Oon

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Volume control on DVD player remote. Lose resolution at low volume?	Circlotron	Digital Source	2	10th June 2011 08:20 PM
i need preamp schematics w/o tone control or volume control	hernanstafe	Parts	7	30th January 2008 04:12 AM
The remote control paratactic volume control	audio-gd	Solid State	33	8th June 2007 12:16 AM
PC volume control	sumacSK	Chip Amps	9	28th November 2005 06:33 AM
remote control motorised control for volume pot/knob	CharlesY	Parts	0	25th July 2005 12:12 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th September 2009, 02:28 AM	#2
marchel diyAudio Member Join Date: Nov 2007	Hi , There are pot based remote volume control on ebay, I havent really tried them ,But I have a feeling that once you turn off the power , they will revert back to a near minimum volume when you turn them back on. Just like in my integrated amp with pot based remote VC. But it doesnt hurt to ask.

12th September 2009, 08:30 AM	#3
danzup diyAudio Member Join Date: Oct 2007 Location: Bucuresti	Yet another Volume controlers and source selections

14th September 2009, 03:59 AM	#4
oon_the_kid diyAudio Member Join Date: May 2008	Thanks for the info guys. I was looking at some relay based volume control as well. Oon

14th September 2009, 09:25 AM	#5
Joao@AltheaMusica diyAudio Member Join Date: Aug 2009	Hello maybe this is an option for you: http://www.tentlabs.com/Products/page31/page31.html Regards Joao

14th September 2009, 02:59 PM	#6
marchel diyAudio Member Join Date: Nov 2007	Hello Danzup, I would like to ask a question and I hope I'm not OT cause I've been OT in the "Ebay Hdam module" thread. Does your relay based ATT suffer from audible click in the speaker ( not the relay) ? Cause I have a similar ATT I bought off ebay, And It has audible on the speaker click at only 2 points in its attenuation range.

15th September 2009, 08:16 AM	#7
danzup diyAudio Member Join Date: Oct 2007 Location: Bucuresti	@marchel : response given in my thread , check there ! No thread jacking .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)