Electrolityc Capacitors Footprints

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi guys, im using Protel to create a few PCBs, but i dont have the right footprints for radial capacitor.

I need the Diameter and Pin Distance of the following caps

1000uf 50v - Diam 16,2mm - Pin 8mm
2200uf 50v -
4700uf 50v - Diam 22,2 mm - Pin 10mm

1000uf 63v -
2200uf 63v -
4700uf 63v - Diam 25,3mm - Pin 11,6mm


i want to use the three values in the same PCB, so ppl can choice the one that they want.

Its for an PSU Design.

THanks in advance.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.