Hi guys, im using Protel to create a few PCBs, but i dont have the right footprints for radial capacitor.
I need the Diameter and Pin Distance of the following caps
1000uf 50v - Diam 16,2mm - Pin 8mm
2200uf 50v -
4700uf 50v - Diam 22,2 mm - Pin 10mm
1000uf 63v -
2200uf 63v -
4700uf 63v - Diam 25,3mm - Pin 11,6mm
i want to use the three values in the same PCB, so ppl can choice the one that they want.
Its for an PSU Design.
THanks in advance.
I need the Diameter and Pin Distance of the following caps
1000uf 50v - Diam 16,2mm - Pin 8mm
2200uf 50v -
4700uf 50v - Diam 22,2 mm - Pin 10mm
1000uf 63v -
2200uf 63v -
4700uf 63v - Diam 25,3mm - Pin 11,6mm
i want to use the three values in the same PCB, so ppl can choice the one that they want.
Its for an PSU Design.
THanks in advance.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.