winding TVC? - diyAudio
Go Back   Home > Forums > Source & Line > Analog Line Level

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd June 2008, 04:46 PM   #1
neskor is offline neskor  Serbia
diyAudio Member
 
Join Date: May 2008
Default winding TVC?

Searching for info how to wind TVC is almost as hard as searching for Holly Grail
Is there anybody who has any info how to wind transformer for this passive preamp?
  Reply With Quote
Old 3rd June 2008, 05:08 PM   #2
oshifis is offline oshifis  Hungary
diyAudio Member
 
Join Date: Mar 2004
Location: Budapest, Hungary
Use litz wire of 20 or more braid. Maybe 2 or 4 or more litz wires parallel. Determine the minimum number of turns for the low frequency cutoff for the load resistance. This will be the initial winding. Then add another winding 2 dB more turns (including the initial), and another with another 2 dB (including all the previous number of turns, calculate the dB to integer numbers). Then connect the ends of the individual elementary wires in series, like 50 turn (0 dB), 60 turns (2 dB), 72 turns (4 dB), 2 x 50 turns in series (two individual elementary wires of the same litz wire, 6 dB), 2 x 60 turns in series (8 dB), 2 x 72 turns in series (10 dB), 4 x 50 turns (12 dB), 4 x 60 turns (14 dB), etc. It needs a bit of calculation and design. The numbers here are just examples demonstrating the principle. You need a good permalloy or similar core. I also plan to make one. Bernhard wrote about his TVC on a thread somewhere in this forum.
  Reply With Quote
Old 3rd June 2008, 05:15 PM   #3
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
tnx for tips

http://www.diyaudio.com/forums/showt...t=#post1466240


http://www.diyaudio.com/forums/searc...der=descending
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
  Reply With Quote
Old 3rd June 2008, 08:18 PM   #4
neskor is offline neskor  Serbia
diyAudio Member
 
Join Date: May 2008
Thanx for info!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transformer winding Tahmid Power Supplies 104 8th July 2008 07:56 AM
winding the primary m-tech Power Supplies 24 30th November 2007 10:29 AM
winding a toroidal mbates14 Power Supplies 16 10th November 2007 03:16 PM
OPT winding orientation MlinarS Tubes / Valves 2 29th April 2005 08:30 AM
choke winding Tim Wyatt Tubes / Valves 7 21st March 2004 01:57 AM


New To Site? Need Help?

All times are GMT. The time now is 03:29 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2