Musical Fidelity X Series DIN PSU pin outs?

tubenut · 21st April 2007, 02:51 PM

Hi all

Been asked to put together a higher VA PSU for a MF XLP series unit. I know it needs 2 x 12 VAC to a 4 pin din plug, I would like to build as far as I can before getting the sample to measure.

Anyone know the pin outs?

Westley · 21st April 2007, 02:58 PM

My X-PSU uses a three pin DIN plug. The DIN is used for the transformer taps only. The two outer pins are for the secondaries,
the middle pin for the common tap of the secondaries. Hope this helps.

tubenut · 21st April 2007, 04:55 PM

Hi

Could have sworn it was four pin but hey, it was a while ago. Will check it, if 3 pin I am sure it helps. You mean middle pin is centre tap and outer pins ~ Voltage I think.

Thanks

tubenut · 21st April 2007, 05:07 PM

Westley, do you know if they link the centre 0 V tap to mains earth?

Thanks

21st April 2007, 02:51 PM	#1
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Musical Fidelity X Series DIN PSU pin outs? Hi all Been asked to put together a higher VA PSU for a MF XLP series unit. I know it needs 2 x 12 VAC to a 4 pin din plug, I would like to build as far as I can before getting the sample to measure. Anyone know the pin outs? __________________ Guillaume Croak Audio Exploration

21st April 2007, 04:55 PM	#3
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Hi Could have sworn it was four pin but hey, it was a while ago. Will check it, if 3 pin I am sure it helps. You mean middle pin is centre tap and outer pins ~ Voltage I think. Thanks __________________ Guillaume Croak Audio Exploration

21st April 2007, 05:07 PM	#4
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Westley, do you know if they link the centre 0 V tap to mains earth? Thanks __________________ Guillaume Croak Audio Exploration

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
musical fidelity B1	mcberta2	Solid State	0	31st December 2007 10:31 AM
Musical fidelity b1	abiedoodles	Solid State	6	20th October 2007 09:29 AM
Musical Fidelity CD Pre 24	devron12	Solid State	5	7th January 2006 06:01 PM
Musical Fidelity	ANTHONY2181	Swap Meet	0	28th September 2002 05:10 PM
Musical Fidelity PR-70	dinamic1	Solid State	0	29th April 2002 08:41 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st April 2007, 02:58 PM	#2
Westley diyAudio Member Join Date: Mar 2007	My X-PSU uses a three pin DIN plug. The DIN is used for the transformer taps only. The two outer pins are for the secondaries, the middle pin for the common tap of the secondaries. Hope this helps.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read