Fixing a descent into hash on AKSA 100 - Page 2

seano · 1st May 2012, 10:37 PM

Thanks lads...I know what needs to be done but there's a few higher priorities to deal with at any one time. So even what might seem to be a quick trip to the shed and the soldering iron is a trick to schedule in!!

AKSA · 1st May 2012, 10:43 PM

Aha, sounds like a new father to me!!

Hugh

seano · 2nd May 2012, 11:20 PM

No longer new...but still suitably busy!!

Shed has two incomplete bicycles awaiting parts, a set of unfinished window architraves, a complete kitchens worth of drawer fronts awaiting their finishing, a jointer that needs reassembly and truing plus there's three pairs of screen doors that really need to get started so that they can be ready for next spring...then there's the stuff to be done outside

I'll get to the amp soon enough!!

Bigun · 3rd May 2012, 02:42 AM

I like these amps, I think you should give up and send them to me

1st May 2012, 10:43 PM	#12
AKSA diyAudio Member Join Date: Sep 2001 Location: Melbourne, Australia	Aha, sounds like a new father to me!! Hugh __________________ Aspen Amplifiers P/L (Australia) www.aksaonline.com

3rd May 2012, 02:42 AM	#14
Bigun diyAudio Member Join Date: Jan 2009 Blog Entries: 2	I like these amps, I think you should give up and send them to me __________________ "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AKSA 55, 100 - Listening impressions	lineup	Solid State	375	3rd December 2010 01:35 AM
AKSA 100 schematic?	DigiSoft	Solid State	40	28th March 2010 01:17 AM
Fs Aksa 100	bacworth	Swap Meet	4	5th December 2005 10:33 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

1st May 2012, 10:37 PM	#11
seano diyAudio Member Join Date: Jan 2006 Location: left of centre and down a bit, Australia	Thanks lads...I know what needs to be done but there's a few higher priorities to deal with at any one time. So even what might seem to be a quick trip to the shed and the soldering iron is a trick to schedule in!!

2nd May 2012, 11:20 PM	#13
seano diyAudio Member Join Date: Jan 2006 Location: left of centre and down a bit, Australia	No longer new...but still suitably busy!! Shed has two incomplete bicycles awaiting parts, a set of unfinished window architraves, a complete kitchens worth of drawer fronts awaiting their finishing, a jointer that needs reassembly and truing plus there's three pairs of screen doors that really need to get started so that they can be ready for next spring...then there's the stuff to be done outside I'll get to the amp soon enough!!