Swordfishy/ASPEN FETZILLA power amp - Page 39

vitalica · 7th September 2011, 02:32 PM

Hello Hugh,

The 2 PCB's and parts came in yesterday!! (Romania)
Thank you

Best regards.

AKSA · 7th September 2011, 09:34 PM

Excellent, Vitalie!!

Many thanks for informing me, always a relief to hear.

Cheers,

Hugh

AKSA · 12:01 AM

Folks,

I'm down to my last few pcbs, and tomorrow is the deadline for all those who have ordered but not yet paid. After tomorrow I will offer those who have quietly approached me for a pair of boards, with or without extra parts. I do NOT have many left, only 8 at this stage. That's 92 out the door, thanks all to you guys, not bad....

In the meantime I've collated some information and a Constructors Sheet. It covers the mechanical aspects of assembly and should be useful.

Finally, if there is sufficient interest in a second group buy for this amplifier, I would be prepared to offer Group Buy #2. It will increase by $5 because postage is much dearer than I thought. And Joz, I have your four boards in reserve!!

Cheers,

Hugh

otto88 · 8th September 2011, 11:54 AM

A vote of thanks Hugh

klewis · 10:44 PM

Hugh,

I dug through a few pages of post and found your 7.5A recommendation for fuses. Would you mind adding that to the BOM? It would save future digging...

Hoping to start the Zetzilla build this weekend.

Ken

EDIT: Ken, amended just now to reflect 4 x 7.5A, large size, conventional, fast flow fuses.

PeteMcK · 9th September 2011, 02:21 AM

re: 'Group Buy #2', I'd be interested in a couple of boards...

ncc · 9th September 2011, 02:33 PM

Hi Hugh,

Received The 2 PCB's and parts this morning. Very nice board indeed

Thank you & Best regards
Doan

JKC · 9th September 2011, 03:15 PM

Hugh

Did you change value of R5 from 100ohm to 10ohm?

George

AKSA · 10:50 PM

Yes, George, I did, that's very sharp of you....

After extensive listening tests, Greg and I decided to make this change and have already amended the new parts list posted at #383 above.

Thanks Doan,

It is a pleasure. In a former life in Defence Cooperation I once taught English to a group of your countrymen, so this is a little bit of deja vu for me!

Cheers,

Hugh

cersepn · 10th September 2011, 04:36 AM

Hugh,

If there's any excess boards from the first group, can i sign up please? Otherwise, i'll be most glad to join the second group buy (if any). Thanks

7th September 2011, 09:34 PM	#382
AKSA diyAudio Member Join Date: Sep 2001 Location: Melbourne, Australia	Excellent, Vitalie!! Many thanks for informing me, always a relief to hear. Cheers, Hugh __________________ Aspen Amplifiers P/L (Australia) www.aksaonline.com

8th September 2011, 11:54 AM	#384
otto88 diyAudio Member Join Date: Dec 2007	A vote of thanks Hugh __________________ a system that won't go clean and loud is like a nice car that cannot go fast

8th September 2011, 04:40 PM	#385
klewis diyAudio Member Join Date: Sep 2007 Blog Entries: 36	Hugh, I dug through a few pages of post and found your 7.5A recommendation for fuses. Would you mind adding that to the BOM? It would save future digging... Hoping to start the Zetzilla build this weekend. Ken EDIT: Ken, amended just now to reflect 4 x 7.5A, large size, conventional, fast flow fuses. Last edited by AKSA; 8th September 2011 at 10:44 PM.

9th September 2011, 02:21 AM	#386
PeteMcK diyAudio Member Join Date: Feb 2002 Location: Sydney	re: 'Group Buy #2', I'd be interested in a couple of boards... __________________ ‘today… there lives alongside the twentieth century the tenth or thirteenth. A hundred million people use electricity and still believe in the magic power of signs and exorcisms” Trotsky

9th September 2011, 10:47 PM	#389
AKSA diyAudio Member Join Date: Sep 2001 Location: Melbourne, Australia	Yes, George, I did, that's very sharp of you.... After extensive listening tests, Greg and I decided to make this change and have already amended the new parts list posted at #383 above. Thanks Doan, It is a pleasure. In a former life in Defence Cooperation I once taught English to a group of your countrymen, so this is a little bit of deja vu for me! Cheers, Hugh __________________ Aspen Amplifiers P/L (Australia) www.aksaonline.com Last edited by AKSA; 9th September 2011 at 10:50 PM.

7th September 2011, 02:32 PM	#381
vitalica diyAudio Member Join Date: Feb 2005 Location: Bucharest	Hello Hugh, The 2 PCB's and parts came in yesterday!! (Romania) Thank you Best regards.

9th September 2011, 02:33 PM	#387
ncc diyAudio Member Join Date: Jul 2006 Location: VN	Hi Hugh, Received The 2 PCB's and parts this morning. Very nice board indeed Thank you & Best regards Doan

9th September 2011, 03:15 PM	#388
JKC diyAudio Member Join Date: Jun 2011 Location: Calgary	Hugh Did you change value of R5 from 100ohm to 10ohm? George

10th September 2011, 04:36 AM	#390
cersepn diyAudio Member Join Date: Feb 2010	Hugh, If there's any excess boards from the first group, can i sign up please? Otherwise, i'll be most glad to join the second group buy (if any). Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aspen Headphone Amp	AKSA	AKSA	1129	2nd June 2011 05:48 AM
Aspen Maya	Vegking	AKSA	7	17th May 2011 05:02 AM
DIYaudio to become new Aspen Forum	AKSA	AKSA	13	2nd May 2011 07:04 AM
Sachiko/aspen slab	rmcelroy	Full Range	0	9th March 2011 06:34 PM
Aspen HAKSA Group Buy	AKSA	AKSA	74	16th November 2010 05:17 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read