• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

The Asynchronous USB Audio class 2 module.

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
You only need file the application, which does not take several years. You do not need to wait for acceptance nor approval of the patent before you can ship product.

True, but you cannot enforce an application, and in the mean time you have to disclose the technology. Not discouraging anyone from filing patents, but protection is far from trivial. In addition, if you want protection in other countries, you will need to file in those countries as well. Then there is patent maintenance fees...
 
My personal lawyer (Wiki) says it's possible to patent software practically in the US only so I could steal your code and sell it here in europe :D but that's what copyright is for ;)

At least it's nice to know it's something worth patenting. I'm eager to hear what it is, guess your not sharing that :p (yet)
 
True, but you cannot enforce an application, and in the mean time you have to disclose the technology. Not discouraging anyone from filing patents, but protection is far from trivial. In addition, if you want protection in other countries, you will need to file in those countries as well. Then there is patent maintenance fees...

Some chips have protected areas where you can't extract the firmware. I don't know if xmos has that feature.... This is likely the most practical solution if available.
Small operations are not afraid of patents because it cost more to go after them than what you can recover. Only big companies are "afraid".
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.